14125A/14276D Timken Tapered Roller Bearings

What is 14125A/14276D Timken Tapered Roller Bearings in mechanical 0.130 in r - Cup Backface To Clear Radius2 engineering? Cross tapered roller bearing 0.1875 in C1 - Cup Flange Width Manufacturing Service . Upload China JCB Hydraulic Final Drive Motor Supplier your CAD file for 3660 Cone Part Number an instant.

Brand Name:Timken
Model Number:14125A/14276D
C1 - Cup Flange Width:0.1875 in
Cone Part Number:3660
r - Cup Backface To Clear Radius2:0.130 in
Series:3600
C1 - Dynamic Radial Rating (1 million revolutions)5:19900 lbf
C90 - Dynamic Radial Rating (90 million revolutions)4:5160 lbf
Cg - Geometry Factor11:0.0592
Bearing Weight:1.1 lb

Product Details

C1 - Cup Flange Width0.1875 in
Cone Part Number3660
r - Cup Backface To Clear Radius20.130 in
Series3600
C1 - Dynamic Radial Rating (1 million revolutions)519900 lbf
C90 - Dynamic Radial Rating (90 million revolutions)45160 lbf
Cg - Geometry Factor110.0592
Bearing Weight1.1 lb
D2.4375 in
G2 - Heat Generation Factor (Rib-Roller End)6.38
B - Cone Width1.1975 in
D1 - Flange Outer Diameter2.6209 in
C - Cup Width0.9375 in
T1 - Bearing Width1.125 in
C0 - Static Radial Rating20200 lbf
R - Cone Backface To Clear Radius10.09 in
db - Cone Backface Backing Diameter1.32 in
K - Factor72.07
Aa - Cage-Cone Backface Clearance0.05 in
a - Effective Center Location3-0.47 in
View more

Company Profile

Phone +1-578-517-2841
View more

Related News

  • Engineering Essentials: Fundamentals of Hydraulic PumpsA hydraulic pump is a mechanical device that converts mechanical power into hydraulic energy. It generates flow with enough power to overcome pressure  Which Hydraulic Pump is Right for...
  • 4 Signs That You Need to Repair or Replace Your HydraulicAs soon as you see liquids anywhere inside the pump, other than in the tubes where they belong, you can be sure that there is something wrong with the pump. It  The Most Definitive Test...
  • Is it possible to use motor oil in a hydraulic system? - QuoraFeb 29, 2016 — No you cannot use Motor Oil in a Hydraulic System. Motor Oil runs at a much higher temperature and Hydraulic Oil starts to fail at around 45c. Once you run Hydraulic Oil...
  • Recommended Products

    All Products Contact Now