K516800R Timken Thrust Tapered Roller Bearings

K516800R Timken Thrust Tapered Roller Bearings SEARCH - Whether it's agriculture or 63.5 mm Da max construction equipment NTN Manufacturer Name your working on, China JCB Hydraulic Final Drive Motor Supplier Has theCross tapered roller bearing 10.8 kN Fatigue limit load, Cu you need.

Brand Name:Timken
Model Number:K516800R
Da max:63.5 mm
Manufacturer Name:NTN
Fatigue limit load, Cu:10.8 kN
Nlim (grease):5,500 rpm
da max:38.5 mm
e:0.61
r min.:1,5 mm
ra max.:1,5 mm

Product Details

Da max63.5 mm
Manufacturer NameNTN
Fatigue limit load, Cu10.8 kN
Nlim (grease)5,500 rpm
da max38.5 mm
e0.61
r min.1,5 mm
ra max.1,5 mm
Mass0.59 kg
T28,75 mm
Bore Diameter (mm)30
CategoryBearings
(Oil) Lubrication Speed7 300 r/min
Calculation factor (Y0)0,54
Basic dynamic load rating (C)70 kN
Minimum Buy QuantityN/A
Bearing number4T-32306CR
db max.37 mm
Weight / Kilogram0.591
Outer Diameter (mm)72
View more

Company Profile

Phone +1-578-517-2841
View more

Related News

  • Engineering Essentials: Fundamentals of Hydraulic PumpsA hydraulic pump is a mechanical device that converts mechanical power into hydraulic energy. It generates flow with enough power to overcome pressure  Which Hydraulic Pump is Right for...
  • 4 Signs That You Need to Repair or Replace Your HydraulicAs soon as you see liquids anywhere inside the pump, other than in the tubes where they belong, you can be sure that there is something wrong with the pump. It  The Most Definitive Test...
  • Is it possible to use motor oil in a hydraulic system? - QuoraFeb 29, 2016 — No you cannot use Motor Oil in a Hydraulic System. Motor Oil runs at a much higher temperature and Hydraulic Oil starts to fail at around 45c. Once you run Hydraulic Oil...
  • Recommended Products

    All Products Contact Now