| Case 84565752 Reman Hydraulic Final Drive Motor | Fit:J7; RoHS:6; Accessory:With cast iron cover; Surface Treatment:No; Basic Load Rating, Static Rating(N):17800; Basic Load Rating, Dynamic Rating(N):29100; Unit, Type:Insert Bearing Unit; Stroke:No; Bearing Unit, Type:Square flange shape; |
| Case CX160B Hydraulic Final Drive Motor | Fatigue limit load, Cu:2.36 kN; d:60 mm; f0:13.2; Dynamic load, C:82 kN; ra max:2 mm; Static load, C0:52 kN; da max:80.5 mm; Characteristic rolling element frequency, BSF:4.09 Hz; B:31 mm; D:130 mm; |
| Case 16132A1 Hydraulic Final Drive Motor | C0:71.5 kN; B:96 mm; S:39.7 mm; Designation of bearing:UC218G2; Weight:4.45 kg; s1:48 mm; T max.:100 °C; Recommended tightening torque for set screw:33 Nm; d:90 mm; T min.:-20 °C; |
| Case 9050B Hydraulic Final Drive Motor | Cg - Geometry Factor:0.0668; C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cup Part Number:14273; C - Cup Width:16.955 mm; G1 - Heat Generation Factor (Roller-Raceway):18; a - Effective Center Location3:-4.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; db - Cone Backface Backing Diameter:45.97 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; R - Cone Backface To Clear Radius1:3.560 mm; |
| Case 151827A1 Hydraulic Final Drive Motor | B:49.2 mm; T max.:200 °C; C:29.6 kN; A5:30.2 mm; G:M6x1; Designation of bearing:UC208-24G2T20; C0:18.2 kN; Designation of housing:C208-; T min.:-20 °C; S:19 mm; |
| Case 87600262 Reman Hydraulic Final Drive Motor | Mass:0.64 kg; d:75 mm; Dynamic load, C:38.4 kN; rs min:1.1 mm; Characteristic inner ring frequency, BPFI:8.44 Hz; Radial clearance class:C4; D1:105.8 mm; Characteristic rolling element frequency, BSF:7.85 Hz; Fatigue limit load, Cu:1.53 kN; Max operating temperature, Tmax:120 °C; |
| Case 465 2-SPD Reman Hydraulic Final Drive Motor | s1:15.5 mm; L:65 mm; L1:18 mm; H1:9 mm; T min.:-40 °C; Designation of housing:PAE204-; A:32 mm; d:19.05 mm; B:31 mm; A1:19 mm; |
| Case CK75 Aftermarket Hydraulic Final Drive Motor | B:34 mm; da max:119 mm; da min:111 mm; Min operating temperature, Tmin:-20 °C; f0:14.4; d:100 mm; Da max:169 mm; Nref:4,800 rpm; Mass:3.19 kg; Brand:SNR; |
| Case CX210CLC Hydraulic Final Drive Motor | Fatigue limit load, Cu:1.05 kN; Characteristic outer ring frequency, BPF0:6.07 Hz; D3 max:91.82 mm; ra max:1 mm; b max:3 mm; d:60 mm; f0:15.6; Radial clearance class:CN; Brand:NTN; rNs min:0.5 mm; |
| Case 450 2-SPD Reman Hydraulic Final Drive Motor | Max operating temperature, Tmax:120 °C; Weight / Kilogram:0; Minimum Buy Quantity:N/A; Characteristic rolling element frequency, BSF:7.58 Hz; Nlim (grease):3,200 rpm; Nlim (oil):4,200 rpm; Inventory:0.0; Product Group:B04334; ra max:3.5 mm; d1:89 mm; |