| Case 84565752R Reman Hydraulic Final Drive Motor | Static load, C0:232 kN; Number of lubrication holes:4; B:40 mm; d:50 mm; ra max:2 mm; Y0:1.83; Dynamic load, C:250 kN; Ce min:5 mm; Brand:SNR; db min:56 mm; |
| Case 435 2-SPD Reman Hydraulic Final Drive Motor | Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Lateral Width L(mm):58; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Holder Surface Treatment:Black Oxide Coating; Height H(mm):20 ～ 40; Height Indication:Height Configurable; |
| Case 440CT 2-SPD LH Hydraulic Final Drive Motor | S:12.7 mm; Recommended tightening torque for set screw:5.5 Nm; H1:15 mm; d:15 mm; Dz:54 mm; T max.:200 °C; C0:6.65 kN; Designation of open end cover:SCO204-15; T min.:-20 °C; A:40 mm; |
| Case CX210CNLC Hydraulic Final Drive Motor | Recommended tightening torque for set screw:11.5 Nm; T max.:100 °C; A5:18.2 mm; C0:11.2 kN; Weight:0.91 kg; B1:48.3 mm; B:36.4 mm; H:85 mm; A:27 mm; d1:44.1 mm; |
| Case 9050B Hydraulic Final Drive Motor | Cg - Geometry Factor:0.0668; C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cup Part Number:14273; C - Cup Width:16.955 mm; G1 - Heat Generation Factor (Roller-Raceway):18; a - Effective Center Location3:-4.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; db - Cone Backface Backing Diameter:45.97 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; R - Cone Backface To Clear Radius1:3.560 mm; |
| Case 87600262 Reman Hydraulic Final Drive Motor | Mass:0.64 kg; d:75 mm; Dynamic load, C:38.4 kN; rs min:1.1 mm; Characteristic inner ring frequency, BPFI:8.44 Hz; Radial clearance class:C4; D1:105.8 mm; Characteristic rolling element frequency, BSF:7.85 Hz; Fatigue limit load, Cu:1.53 kN; Max operating temperature, Tmax:120 °C; |
| Case 161025A1 Hydraulic Final Drive Motor | Type:Bearings with Housin; Number of Bearings:Double; Shape:Flange Type; Bearing Retained:No; Seals:VV (Non-Contact Rubb; Width T(mm):30 ～ 50; Flange Shape:Compact Type; |
| Case CX17B Hydraulic Final Drive Motor | T max.:200 °C; T min.:-20 °C; A1:22 mm; B:22 mm; Designation of housing:P203-; N1:19 mm; L:127 mm; d:15 mm; G:M6x1; H2:62 mm; |
| Case CX300C Hydraulic Final Drive Motor | s1:21.45 mm; Designation of housing:C207-; H:90 mm; Designation of bearing:UC207-23G2; B:42.9 mm; Weight:0.85 kg; S:17.5 mm; SW:3.97 mm; A3:2 mm; G:M6x1; |
| Case 158046A1 Hydraulic Final Drive Motor | Type:Bearings with Housin; Lateral Width L(mm):54; Bearing I.D. d(mm):20; Height Indication:Height Selection; Height H(mm):40 ～ 60; Number of Bearings:Single; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Shape:L-Shaped; |