| Case 420CT 1-SPD Reman Hydraulic Final Drive Motor | C:19.5 kN; T min.:-40 °C; Z:46.4 mm; Designation of open end cover:SCOU206-20; Recommended tightening torque for set screw:3.7 Nm; e:20 mm; G:R1/8"; s1:15 mm; A2:42 mm; L:108 mm; |
| Case 9020 Hydraulic Final Drive Motor | Type:Bearings with Housin; Flange Shape:Round Type; Bearing Retained:No; Seals:DD (Contact Rubber S; Bearing I.D. d(mm):20; Width T(mm):30 ～ 70; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; RoHS:6; |
| Case 450 1-SPD Reman Hydraulic Final Drive Motor | f0:13.2; Min operating temperature, Tmin:-20 °C; ra max:0.3 mm; Dynamic load, C:5.1 kN; Static load, C0:2.39 kN; Characteristic rolling element frequency, BSF:4.07 Hz; Characteristic inner ring frequency, BPFI:4.93 Hz; D:28 mm; d:12 mm; Nlim (grease):26,000 rpm; |
| Case CK75 Aftermarket Hydraulic Final Drive Motor | B:34 mm; da max:119 mm; da min:111 mm; Min operating temperature, Tmin:-20 °C; f0:14.4; d:100 mm; Da max:169 mm; Nref:4,800 rpm; Mass:3.19 kg; Brand:SNR; |
| Case 87035452R Reman Hydraulic Final Drive Motor | Grease Reference Speed:11000 rpm; Clearance:C0 (Normal); Weight:0.15 Kg; Radius Rs min:1.000 mm; Cr - Dynamic Load Rating:15.9 kN; Outside Diameter D:62.000 mm; Oil Reference Speed:16000 rpm; Features:O.D. Groove; Bore Size d:35 mm; C0r - Static Load Rating:10.3 kN; |
| Case 87349721R Reman Hydraulic Final Drive Motor | A1:26 mm; L2:21 mm; C:57.2 kN; H:167 mm; L:224 mm; Designation of bearing:UC213G2T04; T min.:-40 °C; Weight:6.66 kg; A5:39.7 mm; L1:137 mm; |
| Case CK15 Hydraulic Final Drive Motor | T max.:100 °C; s1:39.7 mm; d1:62 mm; T min.:-20 °C; A1:16 mm; Weight:2.37 kg; Recommended tightening torque for set screw:11.5 Nm; Dz:95 mm; B:42.8 mm; G:M6x1; |
| Case CX330B Hydraulic Final Drive Motor | Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:US207G2T04; N:15mm; C:25.7 kN; Z:30 mm; Designation of housing:FA207N-; e:19 mm; H:161 mm; L1:82 mm; T max.:100 °C; |
| Case 465 1-SPD Reman Hydraulic Final Drive Motor | manufacturer product page:Click here; series:NJ; d1:84.8 mm; Radial clearance class:C3; Category:Cylindrical Roller B; Da max:112 mm; Manufacturer Name:NTN; Static load, C0:94.5 kN; r1s min:1.5 mm; d:65 mm; |
| Case 84565749 Reman Hydraulic Final Drive Motor | A1:25 mm; L:236 mm; B:74.6 mm; J:184 mm; Weight:13.5 kg; H3:200; C0:76.8 kN; S:37.3 mm; e:21 mm; T max.:100 °C; |