| Case CX28 Hydraulic Final Drive Motor | Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Days to Ship:7 Days; Flange O.D. H(φ):72; Seals:DD (Contact Rubber S; Width T(mm):40; Bearing Material:[Steel] Steel; Bearing Part Number:6203; Bearing I.D. d(mm):17; |
| Case 161303A1 Hydraulic Final Drive Motor | RoHS:6; Bearing Material:Steel; Seals:ZZ (Double Shield); Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Housing Material:[Aluminum Alloy] 201; |
| Case 87035452R Reman Hydraulic Final Drive Motor | Grease Reference Speed:11000 rpm; Clearance:C0 (Normal); Weight:0.15 Kg; Radius Rs min:1.000 mm; Cr - Dynamic Load Rating:15.9 kN; Outside Diameter D:62.000 mm; Oil Reference Speed:16000 rpm; Features:O.D. Groove; Bore Size d:35 mm; C0r - Static Load Rating:10.3 kN; |
| Case 84565752 Reman Hydraulic Final Drive Motor | Fit:J7; RoHS:6; Accessory:With cast iron cover; Surface Treatment:No; Basic Load Rating, Static Rating(N):17800; Basic Load Rating, Dynamic Rating(N):29100; Unit, Type:Insert Bearing Unit; Stroke:No; Bearing Unit, Type:Square flange shape; |
| Case 440CT 2-SPD RH Hydraulic Final Drive Motor | Bearing UPC:013992039446; Bolt Size:4 x M24; Shaft Size:5-3/16 in; Dimension H1:2.0 in; Bearing Type:Split Cylindrical Re; Dimension H:7.992 in; Seal Type:Viton Single Lip; Dimension H2:18.1 in; Cor - Static Load Rating:183669 lbf; Maximum Speed:1450 rpm; |
| Case CX290DLC SL Hydraulic Final Drive Motor | r:0.6; SW:4 mm; C:16 mm; D:62 mm; S:9 mm; C0:11.2 kN; d1:44.1 mm; B2:15.9 mm; G:M8x1; B:23.8 mm; |
| Case 161320A1 Hydraulic Final Drive Motor | B1:35.7 mm; G:R1/8"; H:42.9 mm; A:38 mm; Designation of open end cover:SCOE206-30; d1:44.1 mm; S:9 mm; A1:25 mm; Recommended tightening torque for set screw:11.5 Nm; H2:82 mm; |
| Case 445CT-3 2-SPD RH Hydraulic Final Drive Motor | Aa - Cage-Cone Backface Clearance:0.13 in; Cone Part Number:6385; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:10400 lbf; C0 - Static Radial Rating:90900 lbf; db - Cone Backface Backing Diameter:3.31 in; a - Effective Center Location4:-0.76 in; Design Units:Imperial; C90 - Dynamic Radial Rating (90 million revolutions)5:18700 lbf; da - Cone Frontface Backing Diameter:3.04 in; C1 - Dynamic Radial Rating (1 million revolutions)6:72300 lbf; |
| Case CK15 Hydraulic Final Drive Motor | T max.:100 °C; s1:39.7 mm; d1:62 mm; T min.:-20 °C; A1:16 mm; Weight:2.37 kg; Recommended tightening torque for set screw:11.5 Nm; Dz:95 mm; B:42.8 mm; G:M6x1; |
| Case 440CT 2-SPD LH Hydraulic Final Drive Motor | S:12.7 mm; Recommended tightening torque for set screw:5.5 Nm; H1:15 mm; d:15 mm; Dz:54 mm; T max.:200 °C; C0:6.65 kN; Designation of open end cover:SCO204-15; T min.:-20 °C; A:40 mm; |