| Case 155817A1 Hydraulic Final Drive Motor | da max:26 mm; Product Group:B04144; Radial clearance class:C3; E:41.5 mm; B:18 mm; Minimum Buy Quantity:N/A; Fatigue limit load, Cu:3.45 kN; Mass (without HJ ring):0.14 kg; d:20 mm; Nlim (grease):14,000 rpm; |
| Case 9020 Hydraulic Final Drive Motor | Type:Bearings with Housin; Flange Shape:Round Type; Bearing Retained:No; Seals:DD (Contact Rubber S; Bearing I.D. d(mm):20; Width T(mm):30 ～ 70; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; RoHS:6; |
| Case 151890A1 Hydraulic Final Drive Motor | G:M6x1; Designation of housing:T207N-; Designation of bearing:US207-22G2; d:34.92 mm; Recommended tightening torque for set screw:8 Nm; L3:64 mm; N2:37 mm; L:129 mm; N:22mm; SW:3.97 mm; |
| Case 87035452R Reman Hydraulic Final Drive Motor | Grease Reference Speed:11000 rpm; Clearance:C0 (Normal); Weight:0.15 Kg; Radius Rs min:1.000 mm; Cr - Dynamic Load Rating:15.9 kN; Outside Diameter D:62.000 mm; Oil Reference Speed:16000 rpm; Features:O.D. Groove; Bore Size d:35 mm; C0r - Static Load Rating:10.3 kN; |
| Case 87600262 Reman Hydraulic Final Drive Motor | Mass:0.64 kg; d:75 mm; Dynamic load, C:38.4 kN; rs min:1.1 mm; Characteristic inner ring frequency, BPFI:8.44 Hz; Radial clearance class:C4; D1:105.8 mm; Characteristic rolling element frequency, BSF:7.85 Hz; Fatigue limit load, Cu:1.53 kN; Max operating temperature, Tmax:120 °C; |
| Case CX35 Hydraulic Final Drive Motor | Weight:0.63 kg; d:25.4 mm; Designation of housing:PG205N-; Dz:60 mm; A:38 mm; L:75 mm; T min.:-20 °C; J:50 mm; N:M10; T max.:100 °C; |
| Case CX240B Hydraulic Final Drive Motor | Bearing Type:Split Cylindrical Re; Support Type:Round Flange; Dimension R:13.1 in; Bolt Size:4 x M16; Ca - Axial Load Rating:4181.39 lbf; Dimension P:0.9 in; Cor - Static Load Rating:95993 lbf; Dimension H:3.6 in; Bearing UPC:013992026712; Shaft Size:4.25 in; |
| Case CX23 Hydraulic Final Drive Motor | RoHS:6; Number of Bearings:Double; Bearing Part Number:6003; Bearing Material:Steel; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Shape:Bottom Mount; |
| Case CX240LR Hydraulic Final Drive Motor | Weight:0.84 kg; d:28.58 mm; S:15.9 mm; Designation of bearing:UC206-18G2L3; L:80 mm; e:19 mm; N:11,5mm; Recommended tightening torque for set screw:3.7 Nm; A1:12 mm; C:19.5 kN; |
| Case CX210BLR Hydraulic Final Drive Motor | Bearing I.D. d(mm):12; Bearing Retained:No; Housing Material:1045 Carbon Steel; Days to Ship:7 Days; Number of Bearings:Double; Flange Shape:Round Type; RoHS:6; Holder Surface Treatment:Electroless Nickel P; |