| Case 445CT-3 2-SPD LH Hydraulic Final Drive Motor | Number of Raceway Ring Rows:Single Row; Raceway Ring Shape:Tapered Roller; B:25; Outer Ring Type:Flat; Revolution Frequency(rpm):3000; d:75; Rolling Element Material:Steel; Specifications/Environment:Standard; |
| Case CK28 Hydraulic Final Drive Motor | C0:178 kN; Weight:38.3 kg; Designation of housing:FS322-; B:117 mm; T max.:100 °C; A:96 mm; S:46 mm; e:35 mm; d:110 mm; Recommended tightening torque for set screw:75 Nm; |
| Case 84565749R Reman Hydraulic Final Drive Motor | Max operating temperature, Tmax:110 °C; Enclosure Type:Non-Contact Seal; Nlim (grease):32,000 rpm; ra max:0.3 mm; Cage Material:Steel; Weight / Kilogram:0.012; Inner Race Width:0 Inch | 0 Millimete; D:22 mm; Internal Clearance:C2-Snug; Manufacturer Name:NTN; |
| Case 9030 Hydraulic Final Drive Motor | Bearing Retained:No; Shape:T-Shaped; T(mm):25 ～ 35; Holder Surface Treatment:Black Oxide Coating; Housing Material:1045 Carbon Steel; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:608; Number of Bearings:Double; |
| Case CX31 Hydraulic Final Drive Motor | Bearing Number:LSE411BX; Bolt Size:4 x M24; Series Type:Light Series; Maximum Speed:1740 rpm; Dimension N:12.375 in; Bearing UPC:013992059031; Dimension P:0.9 in; Bearing Type:Split Cylindrical Ex; Seal Type:Felt Seal; Dimension T:17.0 in; |
| Case 87355890R Reman Hydraulic Final Drive Motor | Nlim (oil):8,200 rpm; Y0:0.94; a:13.06 mm; Dynamic load, C:46.5 kN; Mass:0.24 kg; ra max:4.7 mm; Static load, C0:54 kN; D:62 mm; Nlim (grease):6,100 rpm; Brand:NTN; |
| Case 440CT 2-SPD LH Hydraulic Final Drive Motor | S:12.7 mm; Recommended tightening torque for set screw:5.5 Nm; H1:15 mm; d:15 mm; Dz:54 mm; T max.:200 °C; C0:6.65 kN; Designation of open end cover:SCO204-15; T min.:-20 °C; A:40 mm; |
| Case 465 1-SPD Reman Hydraulic Final Drive Motor | manufacturer product page:Click here; series:NJ; d1:84.8 mm; Radial clearance class:C3; Category:Cylindrical Roller B; Da max:112 mm; Manufacturer Name:NTN; Static load, C0:94.5 kN; r1s min:1.5 mm; d:65 mm; |
| Case 158038A1 Hydraulic Final Drive Motor | da max:16 mm; Static load, C0:2.39 kN; D:28 mm; rs min:0.3 mm; Mass:0.02 kg; Dynamic load, C:5.1 kN; Characteristic rolling element frequency, BSF:4.07 Hz; Radial clearance class:C3; Characteristic outer ring frequency, BPF0:3.07 Hz; ra max:0.3 mm; |
| Case CX210N Hydraulic Final Drive Motor | Features:Shields; Bore Size d:35 mm; Outside Diameter D:80.000 mm; Grease Reference Speed:9300 rpm; Radius Rs min:1.500 mm; Oil Reference Speed:13000 rpm; Clearance:C3; Weight:0.45 Kg; Cr - Dynamic Load Rating:33.4 kN; Outside Ring Width B:21.000 mm; |