| Case 440CT-3 2-SPD LH Hydraulic Final Drive Motor | Designation of housing:FA203N-; C:9.55 kN; A:25.5 mm; B:22 mm; Weight:0.31 kg; C0:4.78 kN; Dz:46 mm; Z:34.8 mm; d:12 mm; e:15 mm; |
| Case CX25 Hydraulic Final Drive Motor | SW:3 mm; E:24 mm; A2:40 mm; s1:15 mm; A5:22 mm; Weight:0.97 kg; H:85 mm; S:8 mm; C:19.5 kN; Recommended tightening torque for set screw:5.5 Nm; |
| Case 87367732 Reman Hydraulic Final Drive Motor | Bearing I.D. d(mm):12; Type:Bearings with Housin; Number of Bearings:Double; Shape:Flanged Pilot Type; Width T(mm):30 ～ 70; Flange Shape:Square Type; Flange O.D. H(φ):54; Bearing Used:Deep Groove Ball Bea; |
| Case 450 1-SPD Reman Hydraulic Final Drive Motor | f0:13.2; Min operating temperature, Tmin:-20 °C; ra max:0.3 mm; Dynamic load, C:5.1 kN; Static load, C0:2.39 kN; Characteristic rolling element frequency, BSF:4.07 Hz; Characteristic inner ring frequency, BPFI:4.93 Hz; D:28 mm; d:12 mm; Nlim (grease):26,000 rpm; |
| Case CX31B Hydraulic Final Drive Motor | Bore Size d:17 mm; Oil Limiting Speed:24000 rpm; Outside Diameter D:35.000 mm; Features:Open; Weight:0.03 Kg; Clearance:C3; Outside Ring Width B:8.000 mm; Grease Limiting Speed:17000 rpm; Cr - Dynamic Load Rating:6 kN; C0r - Static Load Rating:3.3 kN; |
| Case 84565751 Reman Hydraulic Final Drive Motor | Cage Material:Steel; Y1 - ISO Factor5:4.57; r - Outer Ring To Clear Radius2:2.0 mm; Bearing Weight:2.6 Kg; C1(2) - Dynamic Radial Rating (Two-Rows):297000 N; Y2 - ISO Factor6:3; e - ISO Factor3:0.22; R - Inner Ring To Clear Radius1:2.0 mm; Reference Thermal Speed Rating (Oil)7:4200; Cage Type:EJ; |
| Case CX245D Hydraulic Final Drive Motor | C0:7.88 kN; H:104.8 mm; N:8,7mm; Recommended tightening torque for set screw:3.7 Nm; J:80.2 mm; S:7.5 mm; Designation of bearing:US205-16G2; N1:48,5; L:203.2 mm; e:10.3 mm; |
| Case CX240 Hydraulic Final Drive Motor | Days to Ship:6 Days or more; Max. Allowed rpm(rpm):6000; Rolling Element Material:Steel; Type:Ball; d:80; Grease symbol:/2AS; B:10; Seal, Shield Symbols:ZZ; Retainer Type:Punching; |
| Case 465 2-SPD Reman Hydraulic Final Drive Motor | s1:15.5 mm; L:65 mm; L1:18 mm; H1:9 mm; T min.:-40 °C; Designation of housing:PAE204-; A:32 mm; d:19.05 mm; B:31 mm; A1:19 mm; |
| Case CK75 Aftermarket Hydraulic Final Drive Motor | B:34 mm; da max:119 mm; da min:111 mm; Min operating temperature, Tmin:-20 °C; f0:14.4; d:100 mm; Da max:169 mm; Nref:4,800 rpm; Mass:3.19 kg; Brand:SNR; |