| Case 87035341 Reman Hydraulic Final Drive Motor | Size Standards:Metric System; Number of Raceway Ring Rows:Single Row; Bearing Style:Rubber Sealed; Type:Ball; d:15; Rolling Element Material:Steel; Basic Dynamic Load Rating(N):11400; Preload Mark:C3; Seal, Shield Symbols:LLU; |
| Case CX130 Hydraulic Final Drive Motor | Bearing Type:Deep Groove Ball Bea; Housing Material:A2017; Main Body Shape:T Type; Surface Treatment:No; Number of Bearings:Single; Bearing Retained:No; Days to Ship:20 Days; Bearing I.D. d(mm):18; |
| Case 151018A1 Hydraulic Final Drive Motor | Number of Raceway Ring Rows:Double Row; Basic Load Rating, Dynamic Rating(N):121000; Load Direction:Radial; D:90; Raceway Ring Shape:Self-aligning roller; Retainer Type:Punching; d:40; Inner/Outer Ring Material:Steel; Shaft Bore Config.:Cylindrical Bore; |
| Case CX35 Hydraulic Final Drive Motor | Weight:0.63 kg; d:25.4 mm; Designation of housing:PG205N-; Dz:60 mm; A:38 mm; L:75 mm; T min.:-20 °C; J:50 mm; N:M10; T max.:100 °C; |
| Case 160558A1 Hydraulic Final Drive Motor | H:53.9 mm; C:31.85 kN; A1:33 mm; N:M12; Designation of bearing:EX209-26G2L4; B1:56.3 mm; Recommended tightening torque for set screw:8 Nm; A:54 mm; T max.:100 °C; B:42.8 mm; |
| Case 161320A1 Hydraulic Final Drive Motor | B1:35.7 mm; G:R1/8"; H:42.9 mm; A:38 mm; Designation of open end cover:SCOE206-30; d1:44.1 mm; S:9 mm; A1:25 mm; Recommended tightening torque for set screw:11.5 Nm; H2:82 mm; |
| Case CK28 Hydraulic Final Drive Motor | C0:178 kN; Weight:38.3 kg; Designation of housing:FS322-; B:117 mm; T max.:100 °C; A:96 mm; S:46 mm; e:35 mm; d:110 mm; Recommended tightening torque for set screw:75 Nm; |
| Case 465 1-SPD Reman Hydraulic Final Drive Motor | manufacturer product page:Click here; series:NJ; d1:84.8 mm; Radial clearance class:C3; Category:Cylindrical Roller B; Da max:112 mm; Manufacturer Name:NTN; Static load, C0:94.5 kN; r1s min:1.5 mm; d:65 mm; |
| Case CX16B Hydraulic Final Drive Motor | T max.:100 °C; Designation of housing:FLE211-; Designation of bearing:US211G2; S:11.8 mm; N:18mm; A:45.8 mm; Recommended tightening torque for set screw:22 Nm; C0:29.2 kN; B:45.3 mm; A1:15 mm; |
| Case CK75 Aftermarket Hydraulic Final Drive Motor | B:34 mm; da max:119 mm; da min:111 mm; Min operating temperature, Tmin:-20 °C; f0:14.4; d:100 mm; Da max:169 mm; Nref:4,800 rpm; Mass:3.19 kg; Brand:SNR; |