| Case 84565752 Reman Hydraulic Final Drive Motor | Fit:J7; RoHS:6; Accessory:With cast iron cover; Surface Treatment:No; Basic Load Rating, Static Rating(N):17800; Basic Load Rating, Dynamic Rating(N):29100; Unit, Type:Insert Bearing Unit; Stroke:No; Bearing Unit, Type:Square flange shape; |
| Case CX210CLR Hydraulic Final Drive Motor | Internal Symbol:J; O.D.(Ø):125; Size Standards:Metric System; Clearance sign:No; Basic Load Rating, Dynamic Rating(N):140000; Holder Symbol:No; Raceway Ring Shape:Tapered Roller; Outer Ring:With Outer Ring; Symbol of contact angle:No; |
| Case 450CT-3 2-SPD LH Reman Hydraulic Final Drive Motor | Type:Bearings with Housin; Bearing Retained:No; Bearing I.D. d(mm):20; Width T(mm):50 ～ 65; Flange O.D. H(φ):72; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; RoHS:6; Number of Bearings:Double; |
| Case CX245D Hydraulic Final Drive Motor | C0:7.88 kN; H:104.8 mm; N:8,7mm; Recommended tightening torque for set screw:3.7 Nm; J:80.2 mm; S:7.5 mm; Designation of bearing:US205-16G2; N1:48,5; L:203.2 mm; e:10.3 mm; |
| Case CK27 Hydraulic Final Drive Motor | Bearing I.D. d(mm):15; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; RoHS:6; Width T(mm):45 ～ 65; Number of Bearings:Double; |
| Case CX240BLR Hydraulic Final Drive Motor | Weight / Kilogram:2.645; Min operating temperature, Tmin:-40 °C; Width:1.811 Inch | 46 Mill; Nlim (grease):4,800 rpm; UNSPSC:31171547; Retainer:Yes; Inventory:0.0; Harmonized Tariff Code:8482.50.00.00; Bore Profile:Straight; Weight / LBS:5.846; |
| Case 161320A1 Hydraulic Final Drive Motor | B1:35.7 mm; G:R1/8"; H:42.9 mm; A:38 mm; Designation of open end cover:SCOE206-30; d1:44.1 mm; S:9 mm; A1:25 mm; Recommended tightening torque for set screw:11.5 Nm; H2:82 mm; |
| Case CX250DLC Hydraulic Final Drive Motor | S:6.5 mm; Z:22 mm; d1:27.2 mm; J:64 mm; e:15 mm; C0:4.78 kN; N:12mm; Recommended tightening torque for set screw:5.5 Nm; T max.:100 °C; A2:37.1 mm; |
| Case 87600263R Hydraulic Final Drive Motor | Full Timken Part Number:QVVFY28V415SB; e - Geometry Factor:0.25; Dimension D:11.19 in; C - Dynamic Load (Basic):194000 lb; Dimension L Exp:6.62 in; Pre Install Clearance Max:0.201 mm; Housing Style:Round Flange; Oil Lubrication - B/C/O Seal:350 rpm; Eng Internal Radial Clearance - Min:0.0071; UPC Code:0883450093118; |
| Case 450CT-3 2-SPD RH Hydraulic Final Drive Motor | J:82.5 mm; B:36.4 mm; A:33.5 mm; e:20 mm; Weight:1.23 kg; Recommended tightening torque for set screw:8 Nm; d:28.58 mm; B1:48.3 mm; A1:12 mm; Designation of housing:FE206-; |