| Case CX210 Hydraulic Final Drive Motor | B:14 mm; Max operating temperature, Tmax:110 °C; Characteristic outer ring frequency, BPF0:4.6 Hz; d:35 mm; Brand:NTN; Dynamic load, C:16 kN; Da max:57 mm; f0:14.8; Characteristic rolling element frequency, BSF:5.95 Hz; rs min:1 mm; |
| Case 87447234 Hydraulic Final Drive Motor | Designation of housing:FC205-; A4:21 mm; H3:70; B:34 mm; A:27 mm; G:M6x1; C:14 kN; d:23.81 mm; Designation of bearing:UC205-15G2L3; T min.:-20 °C; |
| Case 16364A1 Hydraulic Final Drive Motor | Holder Surface Treatment:Not Provided; Shape:Flange Type; Number of Bearings:Double; RoHS:6; Bearing Retained:No; Bearing Material:Stainless Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Flange O.D. H(φ):60; |
| Case 9050B Hydraulic Final Drive Motor | Cg - Geometry Factor:0.0668; C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cup Part Number:14273; C - Cup Width:16.955 mm; G1 - Heat Generation Factor (Roller-Raceway):18; a - Effective Center Location3:-4.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; db - Cone Backface Backing Diameter:45.97 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; R - Cone Backface To Clear Radius1:3.560 mm; |
| Case CK28 Hydraulic Final Drive Motor | C0:178 kN; Weight:38.3 kg; Designation of housing:FS322-; B:117 mm; T max.:100 °C; A:96 mm; S:46 mm; e:35 mm; d:110 mm; Recommended tightening torque for set screw:75 Nm; |
| Case CX210CLC Hydraulic Final Drive Motor | Fatigue limit load, Cu:1.05 kN; Characteristic outer ring frequency, BPF0:6.07 Hz; D3 max:91.82 mm; ra max:1 mm; b max:3 mm; d:60 mm; f0:15.6; Radial clearance class:CN; Brand:NTN; rNs min:0.5 mm; |
| Case 87035452R Reman Hydraulic Final Drive Motor | Grease Reference Speed:11000 rpm; Clearance:C0 (Normal); Weight:0.15 Kg; Radius Rs min:1.000 mm; Cr - Dynamic Load Rating:15.9 kN; Outside Diameter D:62.000 mm; Oil Reference Speed:16000 rpm; Features:O.D. Groove; Bore Size d:35 mm; C0r - Static Load Rating:10.3 kN; |
| Case 9010B Hydraulic Final Drive Motor | r - Cup Backface To Clear Radius1:0.030 in; Y - ISO Factor3:1.96; Series:3500; Db - Cup Backface Backing Diameter:3.03 in; D:3.4375 in; Design Units:Imperial; Da - Cup Frontface Backing Diameter:3.23 in; e - ISO Factor2:0.31; Cg - Geometry Factor:0.0808; Cup Part Number:3526; |
| Case 87035450 Reman Hydraulic Final Drive Motor | Unit Body Material:Cast Iron; Fit:J7; Pillow Type, Category:Thick Wall; Basic Load Rating, Static Rating(N):40100; Stroke:No; Accessory:No Cover; Days to Ship:Quote; Surface Treatment:No; Rolling Element Material:Bearing Steel; |
| Case CX240BLR Hydraulic Final Drive Motor | Weight / Kilogram:2.645; Min operating temperature, Tmin:-40 °C; Width:1.811 Inch | 46 Mill; Nlim (grease):4,800 rpm; UNSPSC:31171547; Retainer:Yes; Inventory:0.0; Harmonized Tariff Code:8482.50.00.00; Bore Profile:Straight; Weight / LBS:5.846; |