| Case 87035450 Reman Hydraulic Final Drive Motor | Unit Body Material:Cast Iron; Fit:J7; Pillow Type, Category:Thick Wall; Basic Load Rating, Static Rating(N):40100; Stroke:No; Accessory:No Cover; Days to Ship:Quote; Surface Treatment:No; Rolling Element Material:Bearing Steel; |
| Case 87600262 Reman Hydraulic Final Drive Motor | Mass:0.64 kg; d:75 mm; Dynamic load, C:38.4 kN; rs min:1.1 mm; Characteristic inner ring frequency, BPFI:8.44 Hz; Radial clearance class:C4; D1:105.8 mm; Characteristic rolling element frequency, BSF:7.85 Hz; Fatigue limit load, Cu:1.53 kN; Max operating temperature, Tmax:120 °C; |
| Case CX240LR Hydraulic Final Drive Motor | Weight:0.84 kg; d:28.58 mm; S:15.9 mm; Designation of bearing:UC206-18G2L3; L:80 mm; e:19 mm; N:11,5mm; Recommended tightening torque for set screw:3.7 Nm; A1:12 mm; C:19.5 kN; |
| Case 9010B Hydraulic Final Drive Motor | r - Cup Backface To Clear Radius1:0.030 in; Y - ISO Factor3:1.96; Series:3500; Db - Cup Backface Backing Diameter:3.03 in; D:3.4375 in; Design Units:Imperial; Da - Cup Frontface Backing Diameter:3.23 in; e - ISO Factor2:0.31; Cg - Geometry Factor:0.0808; Cup Part Number:3526; |
| Case CX130 Hydraulic Final Drive Motor | Bearing Type:Deep Groove Ball Bea; Housing Material:A2017; Main Body Shape:T Type; Surface Treatment:No; Number of Bearings:Single; Bearing Retained:No; Days to Ship:20 Days; Bearing I.D. d(mm):18; |
| Case 151890A1 Hydraulic Final Drive Motor | G:M6x1; Designation of housing:T207N-; Designation of bearing:US207-22G2; d:34.92 mm; Recommended tightening torque for set screw:8 Nm; L3:64 mm; N2:37 mm; L:129 mm; N:22mm; SW:3.97 mm; |
| Case CX25 Hydraulic Final Drive Motor | SW:3 mm; E:24 mm; A2:40 mm; s1:15 mm; A5:22 mm; Weight:0.97 kg; H:85 mm; S:8 mm; C:19.5 kN; Recommended tightening torque for set screw:5.5 Nm; |
| Case 84565749R Reman Hydraulic Final Drive Motor | Max operating temperature, Tmax:110 °C; Enclosure Type:Non-Contact Seal; Nlim (grease):32,000 rpm; ra max:0.3 mm; Cage Material:Steel; Weight / Kilogram:0.012; Inner Race Width:0 Inch | 0 Millimete; D:22 mm; Internal Clearance:C2-Snug; Manufacturer Name:NTN; |
| Case 9050 Hydraulic Final Drive Motor | a - Effective Center Location3:-3.6 mm; B:33.250 mm; Cage Type:Stamped Steel; K - Factor7:1.34; Db - Cup Backface Backing Diameter:117.09 mm; C - Cup Width:27 mm; Cone Part Number:X32215; e - ISO Factor8:0.44; da - Cone Frontface Backing Diameter:84.07 mm; Y - ISO Factor9:1.38; |
| Case CX31 Hydraulic Final Drive Motor | Bearing Number:LSE411BX; Bolt Size:4 x M24; Series Type:Light Series; Maximum Speed:1740 rpm; Dimension N:12.375 in; Bearing UPC:013992059031; Dimension P:0.9 in; Bearing Type:Split Cylindrical Ex; Seal Type:Felt Seal; Dimension T:17.0 in; |