| Case 9050B Hydraulic Final Drive Motor | Cg - Geometry Factor:0.0668; C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cup Part Number:14273; C - Cup Width:16.955 mm; G1 - Heat Generation Factor (Roller-Raceway):18; a - Effective Center Location3:-4.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; db - Cone Backface Backing Diameter:45.97 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; R - Cone Backface To Clear Radius1:3.560 mm; |
| Case CK75 Aftermarket Hydraulic Final Drive Motor | B:34 mm; da max:119 mm; da min:111 mm; Min operating temperature, Tmin:-20 °C; f0:14.4; d:100 mm; Da max:169 mm; Nref:4,800 rpm; Mass:3.19 kg; Brand:SNR; |
| Case 87045010 Reman Hydraulic Final Drive Motor | Features:Non-Contact Seals; Outside Ring Width B:5.000 mm; Bore Size d:3.000 mm; Outside Diameter D:13.000 mm; Weight:0.0030 Kg; Oil Limiting Speed:60000 rpm; Grease Limiting Speed:51000 rpm; Cr - Dynamic Load Rating:1.3 kN; Radius Rs min:0.200 mm; C0r - Static Load Rating:0.49 kN; |
| Case 450 2-SPD Reman Hydraulic Final Drive Motor | Max operating temperature, Tmax:120 °C; Weight / Kilogram:0; Minimum Buy Quantity:N/A; Characteristic rolling element frequency, BSF:7.58 Hz; Nlim (grease):3,200 rpm; Nlim (oil):4,200 rpm; Inventory:0.0; Product Group:B04334; ra max:3.5 mm; d1:89 mm; |
| Case CX300DLC Hydraulic Final Drive Motor | A1:36 mm; N:17mm; Weight:3.1 kg; S:19 mm; H1:20 mm; T max.:200 °C; d:44.45 mm; Recommended tightening torque for set screw:8 Nm; Designation of bearing:UC209-28G2T20; T min.:-20 °C; |
| Case 440CT 2-SPD LH Hydraulic Final Drive Motor | S:12.7 mm; Recommended tightening torque for set screw:5.5 Nm; H1:15 mm; d:15 mm; Dz:54 mm; T max.:200 °C; C0:6.65 kN; Designation of open end cover:SCO204-15; T min.:-20 °C; A:40 mm; |
| Case 158399A1 Hydraulic Final Drive Motor | Weight:4.16 kg; C0:32.8 kN; Designation of housing:PAE212N-; d1:82 mm; H2:140 mm; H:69.9 mm; d:60 mm; E:20 mm; T min.:-20 °C; A:60 mm; |
| Case CX245DSRLC Hydraulic Final Drive Motor | Type:Bearings with Housin; Shape:Bottom Mount; Lateral Width L(mm):40; RoHS:6; Seals:ZZ (Double Shield); Height Indication:Height Selection; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Holder Surface Treatment:Not Provided; |
| Case 87035344E Reman Hydraulic Final Drive Motor | Designation of closed end cover:SCC206; Weight:1.2 kg; A:40 mm; G:R1/8"; Recommended tightening torque for set screw:3.7 Nm; Designation of open end cover:SCOU206-19; Designation of bearing:UC206-19G2L4; H2:82 mm; H1:17 mm; C0:11.2 kN; |
| Case 158038A1 Hydraulic Final Drive Motor | da max:16 mm; Static load, C0:2.39 kN; D:28 mm; rs min:0.3 mm; Mass:0.02 kg; Dynamic load, C:5.1 kN; Characteristic rolling element frequency, BSF:4.07 Hz; Radial clearance class:C3; Characteristic outer ring frequency, BPF0:3.07 Hz; ra max:0.3 mm; |