| Case CK13 Hydraulic Final Drive Motor | Int Radial Clearance Reduction Min:0.0015 in; Dimension E:6.000 in; e - Geometry Factor:0.25; Shaft Size Type:Imperial; Housing Style:Four-Bolt Square Fla; Adapter Sleeve Axial Movement Min:0.022 in; Grease Lubrication - B/C/O Seal:1300 rpm; Grease Lubrication - M/N Seal:1600 rpm; Oil Lubrication - M/N Seal:1600 rpm; Adapter Sleeve Axial Movement Max:0.03 in; |
| Case 445CT-3 2-SPD RH Hydraulic Final Drive Motor | Aa - Cage-Cone Backface Clearance:0.13 in; Cone Part Number:6385; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:10400 lbf; C0 - Static Radial Rating:90900 lbf; db - Cone Backface Backing Diameter:3.31 in; a - Effective Center Location4:-0.76 in; Design Units:Imperial; C90 - Dynamic Radial Rating (90 million revolutions)5:18700 lbf; da - Cone Frontface Backing Diameter:3.04 in; C1 - Dynamic Radial Rating (1 million revolutions)6:72300 lbf; |
| Case 440 1-SPD Reman Hydraulic Final Drive Motor | Jmax:268 mm; Jmin:252 mm; H2:32.0 mm; Shaft Diameter d:75 mm; Bearing:22217K; Bolt Qty:2; Housing Mass:10.4 Kg; C1 Dynamic Load Rating:297; Cage Type:EJ; A1:90 mm; |
| Case 440 2-SPD Reman Hydraulic Final Drive Motor | Dimension SA:3.39 in; Y1 - Geometry Factor:2.79; Dimension M:2.15 in; Pre Install Clearance Max:0.0026 in; Float:0.083 in; Locking Style:Single Concentric; Engineering Group:Mounted Bearing; Dimension D Max:8.63 in; Pre Install Clearance Min:0.0016 in; Dimension RA:0.21 in; |
| Case 160142A1 Hydraulic Final Drive Motor | C - Dynamic Load (Basic):86600 lb; Shaft Size Type:Metric; Y2 - Geometry Factor:4.17; Dimension BC:9.5 in; Grease Lubrication - B/C/O Seal:950 rpm; Dimension E:6.72 in; Shaft Size :90 mm; Housing Style:Four-Bolt Square Fla; UPC Code:0883450336987; Oil Lubrication - B/C/O Seal:1000 rpm; |
| Case CX290DLC MH Hydraulic Final Drive Motor | RoHS:6; Surface Treatment:No Surface Treatment; Nominal of Thread(mm):M95; Type:Shake Proof Washer; Shape:Round shape; I.D. (D1):95; Tongue:Tongue bent; Days to Ship:Same day; |
| Case CX25 Hydraulic Final Drive Motor | SW:3 mm; E:24 mm; A2:40 mm; s1:15 mm; A5:22 mm; Weight:0.97 kg; H:85 mm; S:8 mm; C:19.5 kN; Recommended tightening torque for set screw:5.5 Nm; |
| Case CK15 Hydraulic Final Drive Motor | T max.:100 °C; s1:39.7 mm; d1:62 mm; T min.:-20 °C; A1:16 mm; Weight:2.37 kg; Recommended tightening torque for set screw:11.5 Nm; Dz:95 mm; B:42.8 mm; G:M6x1; |
| Case CK75 Aftermarket Hydraulic Final Drive Motor | B:34 mm; da max:119 mm; da min:111 mm; Min operating temperature, Tmin:-20 °C; f0:14.4; d:100 mm; Da max:169 mm; Nref:4,800 rpm; Mass:3.19 kg; Brand:SNR; |
| Case CK135 Hydraulic Final Drive Motor | Material:[Stainless Steel] 30; Surface Treatment:No Surface Treatment; Shape:Square; Thread Nominal M(mm):M3×0.35; Type:Lock Nuts; Volume Discount:Available; Days to Ship:6 Days; RoHS:6; |