| Case 87035451 Reman Hydraulic Final Drive Motor | C:9.55 kN; S:6 mm; B:22 mm; H:67 mm; d:15 mm; T max.:100 °C; C0:4.78 kN; Recommended tightening torque for set screw:3.5 Nm; Designation of housing:C203-; T min.:-20 °C; |
| Case 160432A1 Hydraulic Final Drive Motor | Basic Load Rating, Static Rating(N):15400; Machining:Oil-free type; Stroke:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Accessory:No Cover; Surface Treatment:No; Rolling Element Material:Bearing Steel; Diameter series symbol:Used for Light load; |
| Case 87035451R Reman Hydraulic Final Drive Motor | Bearing Retained:Yes (with retaining; Number of Bearings:Single; Shape:Flange Type; Flange O.D. H(φ):69; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Volume Discount:Available; Seals:DD (Contact Rubber S; Days to Ship:7 Days; |
| Case 87035341R Reman Hydraulic Final Drive Motor | B:95.253 mm; G2 - Heat Generation Factor (Rib-Roller End):322.6; db - Cone Backface Backing Diameter:376.94 mm; da - Cone Frontface Backing Diameter:367.03 mm; Ab - Cage-Cone Frontface Clearance:4.6 mm; Cone Part Number:HM262748WS; Series:HM262700; Aa - Cage-Cone Backface Clearance:8.1 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:100000 lbf; C - Cup Width:74.613 mm; |
| Case CX240BLR Hydraulic Final Drive Motor | Weight / Kilogram:2.645; Min operating temperature, Tmin:-40 °C; Width:1.811 Inch | 46 Mill; Nlim (grease):4,800 rpm; UNSPSC:31171547; Retainer:Yes; Inventory:0.0; Harmonized Tariff Code:8482.50.00.00; Bore Profile:Straight; Weight / LBS:5.846; |
| Case 87600262 Reman Hydraulic Final Drive Motor | Mass:0.64 kg; d:75 mm; Dynamic load, C:38.4 kN; rs min:1.1 mm; Characteristic inner ring frequency, BPFI:8.44 Hz; Radial clearance class:C4; D1:105.8 mm; Characteristic rolling element frequency, BSF:7.85 Hz; Fatigue limit load, Cu:1.53 kN; Max operating temperature, Tmax:120 °C; |
| Case 87367732 Reman Hydraulic Final Drive Motor | Bearing I.D. d(mm):12; Type:Bearings with Housin; Number of Bearings:Double; Shape:Flanged Pilot Type; Width T(mm):30 ～ 70; Flange Shape:Square Type; Flange O.D. H(φ):54; Bearing Used:Deep Groove Ball Bea; |
| Case CX330B Hydraulic Final Drive Motor | Recommended tightening torque for set screw:5.5 Nm; Designation of bearing:US207G2T04; N:15mm; C:25.7 kN; Z:30 mm; Designation of housing:FA207N-; e:19 mm; H:161 mm; L1:82 mm; T max.:100 °C; |
| Case 161320A1 Hydraulic Final Drive Motor | B1:35.7 mm; G:R1/8"; H:42.9 mm; A:38 mm; Designation of open end cover:SCOE206-30; d1:44.1 mm; S:9 mm; A1:25 mm; Recommended tightening torque for set screw:11.5 Nm; H2:82 mm; |
| Case CX330 Hydraulic Final Drive Motor | Surface Treatment:No; Unit, Type:Bearing unit; Rolling Element Material:Steel; Bearing Unit, Type:Pillow Type; Basic Dynamic Load Rating Cr(N):52500; Lubrication method:Oil-Free Type; Unit Body Material:Cast Iron; Cover Type:Steel plate single c; |