| Case 420 1-SPD Reman Hydraulic Final Drive Motor | S:10.9 mm; Recommended tightening torque for set screw:11.5 Nm; N:18mm; T max.:200 °C; C0:23.2 kN; C:35.1 kN; Designation of open end cover:SCO210-50; H:190 mm; G:R1/8"; Designation of housing:FLE210N-; |
| Case CX300DLC Hydraulic Final Drive Motor | A1:36 mm; N:17mm; Weight:3.1 kg; S:19 mm; H1:20 mm; T max.:200 °C; d:44.45 mm; Recommended tightening torque for set screw:8 Nm; Designation of bearing:UC209-28G2T20; T min.:-20 °C; |
| Case 87035342R Reman Hydraulic Final Drive Motor | Mass:0.55 kg; s max:1 mm; Max operating temperature, Tmax:120 °C; D:82 mm; d:60 mm; Characteristic outer ring frequency, BPF0:15.11 Hz; da min:64 mm; Brand:NTN; Radial clearance class:C3; ras max:0.6 mm; |
| Case 87035341R Reman Hydraulic Final Drive Motor | B:95.253 mm; G2 - Heat Generation Factor (Rib-Roller End):322.6; db - Cone Backface Backing Diameter:376.94 mm; da - Cone Frontface Backing Diameter:367.03 mm; Ab - Cage-Cone Frontface Clearance:4.6 mm; Cone Part Number:HM262748WS; Series:HM262700; Aa - Cage-Cone Backface Clearance:8.1 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:100000 lbf; C - Cup Width:74.613 mm; |
| Case 9040 Hydraulic Final Drive Motor | Shape:T-Shaped; Days to Ship:8 Days; Bearing I.D. d(mm):30; Width T(mm):32; Lateral Width L(mm):104; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; |
| Case 87035342 Reman Hydraulic Final Drive Motor | Number of Bearings:Single; Seals:VV (Non-Contact Rubb; Bearing Part Number:6203; Bearing Used:Deep Groove Ball Bea; RoHS:6; Flange Shape:Square Type; Width T(mm):14; Shape:Flange Type; |
| Case CX250DLC Hydraulic Final Drive Motor | S:6.5 mm; Z:22 mm; d1:27.2 mm; J:64 mm; e:15 mm; C0:4.78 kN; N:12mm; Recommended tightening torque for set screw:5.5 Nm; T max.:100 °C; A2:37.1 mm; |
| Case 450CT-3 2-SPD RH Hydraulic Final Drive Motor | J:82.5 mm; B:36.4 mm; A:33.5 mm; e:20 mm; Weight:1.23 kg; Recommended tightening torque for set screw:8 Nm; d:28.58 mm; B1:48.3 mm; A1:12 mm; Designation of housing:FE206-; |
| Case 440 1-SPD Reman Hydraulic Final Drive Motor | Jmax:268 mm; Jmin:252 mm; H2:32.0 mm; Shaft Diameter d:75 mm; Bearing:22217K; Bolt Qty:2; Housing Mass:10.4 Kg; C1 Dynamic Load Rating:297; Cage Type:EJ; A1:90 mm; |
| Case CX300 Hydraulic Final Drive Motor | Days to Ship:8 Days; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Bearing Retained:No; Lateral Width L(mm):70; C Chamfered:Not Provided; Bearing Part Number:6003; RoHS:6; |