| Case 158046A1 Hydraulic Final Drive Motor | Type:Bearings with Housin; Lateral Width L(mm):54; Bearing I.D. d(mm):20; Height Indication:Height Selection; Height H(mm):40 ～ 60; Number of Bearings:Single; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Shape:L-Shaped; |
| Case 84565749R Reman Hydraulic Final Drive Motor | Max operating temperature, Tmax:110 °C; Enclosure Type:Non-Contact Seal; Nlim (grease):32,000 rpm; ra max:0.3 mm; Cage Material:Steel; Weight / Kilogram:0.012; Inner Race Width:0 Inch | 0 Millimete; D:22 mm; Internal Clearance:C2-Snug; Manufacturer Name:NTN; |
| Case 455CT 2-SPD LH Hydraulic Final Drive Motor | Load Direction:Radial; Specifications/Environment:Standard; D:85; Rolling Element Material:Steel; Inner/Outer Ring Material:Steel; Number of Raceway Ring Rows:Single Row; RoHS:6; Outer Ring Type:Flat; |
| Case 440CT 2-SPD RH Hydraulic Final Drive Motor | Bearing UPC:013992039446; Bolt Size:4 x M24; Shaft Size:5-3/16 in; Dimension H1:2.0 in; Bearing Type:Split Cylindrical Re; Dimension H:7.992 in; Seal Type:Viton Single Lip; Dimension H2:18.1 in; Cor - Static Load Rating:183669 lbf; Maximum Speed:1450 rpm; |
| Case CX250C Hydraulic Final Drive Motor | Rolling Element Material:Steel; Inner/Outer Ring Material:Steel; Raceway Ring Shape:Cylindrical Roller; Seal, Shield Symbols:No; Precision Grade Symbol:No; Symbol of contact angle:No; Material Symbol:No; Symbol of Bearing Ring Shape:E; |
| Case 87355890R Reman Hydraulic Final Drive Motor | Nlim (oil):8,200 rpm; Y0:0.94; a:13.06 mm; Dynamic load, C:46.5 kN; Mass:0.24 kg; ra max:4.7 mm; Static load, C0:54 kN; D:62 mm; Nlim (grease):6,100 rpm; Brand:NTN; |
| Case 9040 Hydraulic Final Drive Motor | Shape:T-Shaped; Days to Ship:8 Days; Bearing I.D. d(mm):30; Width T(mm):32; Lateral Width L(mm):104; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; |
| Case 420 1-SPD Reman Hydraulic Final Drive Motor | S:10.9 mm; Recommended tightening torque for set screw:11.5 Nm; N:18mm; T max.:200 °C; C0:23.2 kN; C:35.1 kN; Designation of open end cover:SCO210-50; H:190 mm; G:R1/8"; Designation of housing:FLE210N-; |
| Case CX210CLC Hydraulic Final Drive Motor | Fatigue limit load, Cu:1.05 kN; Characteristic outer ring frequency, BPF0:6.07 Hz; D3 max:91.82 mm; ra max:1 mm; b max:3 mm; d:60 mm; f0:15.6; Radial clearance class:CN; Brand:NTN; rNs min:0.5 mm; |
| Case CX31B Hydraulic Final Drive Motor | Bore Size d:17 mm; Oil Limiting Speed:24000 rpm; Outside Diameter D:35.000 mm; Features:Open; Weight:0.03 Kg; Clearance:C3; Outside Ring Width B:8.000 mm; Grease Limiting Speed:17000 rpm; Cr - Dynamic Load Rating:6 kN; C0r - Static Load Rating:3.3 kN; |