| Case 440CT-3 2-SPD LH Hydraulic Final Drive Motor | Designation of housing:FA203N-; C:9.55 kN; A:25.5 mm; B:22 mm; Weight:0.31 kg; C0:4.78 kN; Dz:46 mm; Z:34.8 mm; d:12 mm; e:15 mm; |
| Case 87600263R Hydraulic Final Drive Motor | Full Timken Part Number:QVVFY28V415SB; e - Geometry Factor:0.25; Dimension D:11.19 in; C - Dynamic Load (Basic):194000 lb; Dimension L Exp:6.62 in; Pre Install Clearance Max:0.201 mm; Housing Style:Round Flange; Oil Lubrication - B/C/O Seal:350 rpm; Eng Internal Radial Clearance - Min:0.0071; UPC Code:0883450093118; |
| Case 87367732R Reman Hydraulic Final Drive Motor | J:121 mm; H:90 mm; S:8 mm; Z:52.8 mm; G:M6x1; C0:11.2 kN; H2:130 mm; T min.:-20 °C; A:50 mm; B:30 mm; |
| Case 87035451 Reman Hydraulic Final Drive Motor | C:9.55 kN; S:6 mm; B:22 mm; H:67 mm; d:15 mm; T max.:100 °C; C0:4.78 kN; Recommended tightening torque for set screw:3.5 Nm; Designation of housing:C203-; T min.:-20 °C; |
| Case 84565750 Reman Hydraulic Final Drive Motor | Cup Part Number:470130; B:90.488 mm; C - Cup Width:63.500 mm; K - Factor7:1.6; db - Cone Backface Backing Diameter:225.04 mm; a - Effective Center Location3:-21.8 mm; Design Units:Imperial; B - Cone Width:92.075 mm; G1 - Heat Generation Factor (Roller-Raceway):914; r - Cup Backface To Clear Radius2:6.35 mm; |
| Case 9050 Hydraulic Final Drive Motor | a - Effective Center Location3:-3.6 mm; B:33.250 mm; Cage Type:Stamped Steel; K - Factor7:1.34; Db - Cup Backface Backing Diameter:117.09 mm; C - Cup Width:27 mm; Cone Part Number:X32215; e - ISO Factor8:0.44; da - Cone Frontface Backing Diameter:84.07 mm; Y - ISO Factor9:1.38; |
| Case 410 1-SPD Reman Hydraulic Final Drive Motor | Snap Ring:No; Inch - Metric:Metric; Characteristic cage frequency, FTF:0.43 Hz; Cage Material:Steel; Weight / Kilogram:0.233; Characteristic outer ring frequency, BPF0:5.55 Hz; Harmonized Tariff Code:8482.10.50.68; Inner Race Width:0 Inch | 0 Millimete; Manufacturer Name:NTN; Weight / LBS:0.53572; |
| Case 445CT 2-SPD LH Reman Hydraulic Final Drive Motor | Days to Ship:8 Days; Number of Bearings:Double; Holder Surface Treatment:Black Oxide Coating; RoHS:6; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Seals:ZZ (Double Shield); Volume Discount:Available; |
| Case 450 2-SPD Reman Hydraulic Final Drive Motor | Max operating temperature, Tmax:120 °C; Weight / Kilogram:0; Minimum Buy Quantity:N/A; Characteristic rolling element frequency, BSF:7.58 Hz; Nlim (grease):3,200 rpm; Nlim (oil):4,200 rpm; Inventory:0.0; Product Group:B04334; ra max:3.5 mm; d1:89 mm; |
| Case 16132A1 Hydraulic Final Drive Motor | C0:71.5 kN; B:96 mm; S:39.7 mm; Designation of bearing:UC218G2; Weight:4.45 kg; s1:48 mm; T max.:100 °C; Recommended tightening torque for set screw:33 Nm; d:90 mm; T min.:-20 °C; |