| Case CX25 Hydraulic Final Drive Motor | SW:3 mm; E:24 mm; A2:40 mm; s1:15 mm; A5:22 mm; Weight:0.97 kg; H:85 mm; S:8 mm; C:19.5 kN; Recommended tightening torque for set screw:5.5 Nm; |
| Case CX135SR Hydraulic Final Drive Motor | Mass:0.2 kg; B:16 mm; da min:35 mm; D:62 mm; Characteristic cage frequency, FTF:0.4 Hz; Characteristic inner ring frequency, BPFI:5.42 Hz; Radial clearance class:C3; rs min:1 mm; d:30 mm; ra max:1 mm; |
| Case 158038A1 Hydraulic Final Drive Motor | da max:16 mm; Static load, C0:2.39 kN; D:28 mm; rs min:0.3 mm; Mass:0.02 kg; Dynamic load, C:5.1 kN; Characteristic rolling element frequency, BSF:4.07 Hz; Radial clearance class:C3; Characteristic outer ring frequency, BPF0:3.07 Hz; ra max:0.3 mm; |
| Case CX28 Hydraulic Final Drive Motor | Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Days to Ship:7 Days; Flange O.D. H(φ):72; Seals:DD (Contact Rubber S; Width T(mm):40; Bearing Material:[Steel] Steel; Bearing Part Number:6203; Bearing I.D. d(mm):17; |
| Case 158399A1 Hydraulic Final Drive Motor | Weight:4.16 kg; C0:32.8 kN; Designation of housing:PAE212N-; d1:82 mm; H2:140 mm; H:69.9 mm; d:60 mm; E:20 mm; T min.:-20 °C; A:60 mm; |
| Case 161303A1 Hydraulic Final Drive Motor | RoHS:6; Bearing Material:Steel; Seals:ZZ (Double Shield); Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Housing Material:[Aluminum Alloy] 201; |
| Case CX290DLC MH Hydraulic Final Drive Motor | RoHS:6; Surface Treatment:No Surface Treatment; Nominal of Thread(mm):M95; Type:Shake Proof Washer; Shape:Round shape; I.D. (D1):95; Tongue:Tongue bent; Days to Ship:Same day; |
| Case CX31B Hydraulic Final Drive Motor | Bore Size d:17 mm; Oil Limiting Speed:24000 rpm; Outside Diameter D:35.000 mm; Features:Open; Weight:0.03 Kg; Clearance:C3; Outside Ring Width B:8.000 mm; Grease Limiting Speed:17000 rpm; Cr - Dynamic Load Rating:6 kN; C0r - Static Load Rating:3.3 kN; |
| Case 9010B Hydraulic Final Drive Motor | r - Cup Backface To Clear Radius1:0.030 in; Y - ISO Factor3:1.96; Series:3500; Db - Cup Backface Backing Diameter:3.03 in; D:3.4375 in; Design Units:Imperial; Da - Cup Frontface Backing Diameter:3.23 in; e - ISO Factor2:0.31; Cg - Geometry Factor:0.0808; Cup Part Number:3526; |
| Case CX135SR tier3 Hydraulic Final Drive Motor | Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6801; Volume Discount:Available; Flange Shape:Square Type; Housing Material:304 Stainless Steel; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Number of Bearings:Single; |