No. | Brand | N | e | C | E | B | r | L | F |
161320A1 | Case | - | - | - | - | - | - | - | - |
CX290 | Case | - | - | - | - | - | - | - | - |
440CT-3 2-SPD LH | Case | - | 15 mm | 9.55 kN | - | 22 mm | - | - | - |
151754A1 | Case | - | - | - | - | - | - | - | - |
CX17B | Case | - | - | - | - | 22 mm | - | 127 mm | - |
465 1-SPD | Case | - | - | - | - | - | - | - | - |
CX31B | Case | - | - | - | - | - | - | - | - |
435 2-SPD | Case | - | - | - | - | - | - | - | - |
450CT 2-SPD RH | Case | - | - | - | - | - | - | - | - |
430 1-SPD | Case | - | - | - | - | - | - | - | - |
87035342R | Case | - | - | - | - | - | - | - | - |
84565749 | Case | - | 21 mm | - | - | 74.6 mm | - | 236 mm | - |
CX135SR | Case | - | - | - | - | 16 mm | - | - | - |
876020262 | Case | - | - | - | - | - | - | - | - |
CX300C | Case | - | - | - | - | 42.9 mm | - | - | - |
87035450R | Case | - | - | - | - | - | - | - | - |
87600263R | Case | - | - | - | - | - | - | - | - |
CX250DLC | Case | 12mm | 15 mm | - | - | - | - | - | - |
84565751 | Case | - | - | - | - | - | - | - | - |
87367732R | Case | - | - | - | - | 30 mm | - | - | - |
CX210 | Case | - | - | - | - | 14 mm | - | - | - |
CX210BNLC | Case | - | - | - | - | - | - | - | - |
CK28 | Case | - | 35 mm | - | - | 117 mm | - | - | - |
87035452R | Case | - | - | - | - | - | - | - | - |
Case 152535A1 Hydraulic Final Drive Motor | Characteristic inner ring frequency, BPFI:4.92 Hz; ra max:2 mm; Max operating temperature, Tmax:120 °C; D:150 mm; Characteristic rolling element frequency, BSF:4.1 Hz; da min:81 mm; Characteristic cage frequency, FTF:0.38 Hz; Min operating temperature, Tmin:-20 °C; d:70 mm; Dynamic load, C:104 kN; |
Case CX230 Hydraulic Final Drive Motor | Days to Ship:8 Days; Stroke:No; Basic Load Rating, Static Rating(N):45000; Seal:Silicone; d:55; Accessory:With steel plate cov; Fit:J7; Basic Load Rating, Dynamic Rating(N):71600; Surface Treatment:No; Rolling Element Material:Bearing Steel; |
Case CX300C Hydraulic Final Drive Motor | s1:21.45 mm; Designation of housing:C207-; H:90 mm; Designation of bearing:UC207-23G2; B:42.9 mm; Weight:0.85 kg; S:17.5 mm; SW:3.97 mm; A3:2 mm; G:M6x1; |
Case CX245D Hydraulic Final Drive Motor | C0:7.88 kN; H:104.8 mm; N:8,7mm; Recommended tightening torque for set screw:3.7 Nm; J:80.2 mm; S:7.5 mm; Designation of bearing:US205-16G2; N1:48,5; L:203.2 mm; e:10.3 mm; |
Case 161320A1 Hydraulic Final Drive Motor | B1:35.7 mm; G:R1/8"; H:42.9 mm; A:38 mm; Designation of open end cover:SCOE206-30; d1:44.1 mm; S:9 mm; A1:25 mm; Recommended tightening torque for set screw:11.5 Nm; H2:82 mm; |
Case CX31 Hydraulic Final Drive Motor | Bearing Number:LSE411BX; Bolt Size:4 x M24; Series Type:Light Series; Maximum Speed:1740 rpm; Dimension N:12.375 in; Bearing UPC:013992059031; Dimension P:0.9 in; Bearing Type:Split Cylindrical Ex; Seal Type:Felt Seal; Dimension T:17.0 in; |
Case CX240B Hydraulic Final Drive Motor | Bearing Type:Split Cylindrical Re; Support Type:Round Flange; Dimension R:13.1 in; Bolt Size:4 x M16; Ca - Axial Load Rating:4181.39 lbf; Dimension P:0.9 in; Cor - Static Load Rating:95993 lbf; Dimension H:3.6 in; Bearing UPC:013992026712; Shaft Size:4.25 in; |
Case CK75 Aftermarket Hydraulic Final Drive Motor | B:34 mm; da max:119 mm; da min:111 mm; Min operating temperature, Tmin:-20 °C; f0:14.4; d:100 mm; Da max:169 mm; Nref:4,800 rpm; Mass:3.19 kg; Brand:SNR; |
Case CX210BNLC Hydraulic Final Drive Motor | Shape:Flange Type; Volume Discount:Available; Bearing Retained:Yes (with retaining; Flange O.D. H(φ):57; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize; |
Case 9010 Hydraulic Final Drive Motor | Shape:Flange Type; RoHS:6; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Bearing Retained:Yes (with retaining; Seals:VV (Non-Contact Rubb; Number of Bearings:Single; Bearing I.D. d(mm):8; |
Case CX290BLC Hydraulic Final Drive Motor Video