| Case 84565750R Reman Hydraulic Final Drive Motor | Volume Discount:Available; Number of Bearings:Double; Seals:VV (Non-Contact Rubb; Flange Shape:Square Type; Bearing Part Number:6003; Bearing Used:Deep Groove Ball Bea; Width T(mm):35; RoHS:6; Type:Bearings with Housin; |
| Case CK52 Hydraulic Final Drive Motor | Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):34100; Fit:J7; Stroke:No; Seal:Triple seals; Accessory:With cast iron cover; d:40; Bearing Inner Dia. Shape:Tapered hole adapter; Rolling Element Material:Bearing Steel; Basic Load Rating, Static Rating(N):21300; |
| Case CX245D Hydraulic Final Drive Motor | C0:7.88 kN; H:104.8 mm; N:8,7mm; Recommended tightening torque for set screw:3.7 Nm; J:80.2 mm; S:7.5 mm; Designation of bearing:US205-16G2; N1:48,5; L:203.2 mm; e:10.3 mm; |
| Case CX210N Hydraulic Final Drive Motor | Features:Shields; Bore Size d:35 mm; Outside Diameter D:80.000 mm; Grease Reference Speed:9300 rpm; Radius Rs min:1.500 mm; Oil Reference Speed:13000 rpm; Clearance:C3; Weight:0.45 Kg; Cr - Dynamic Load Rating:33.4 kN; Outside Ring Width B:21.000 mm; |
| Case 158038A1 Hydraulic Final Drive Motor | da max:16 mm; Static load, C0:2.39 kN; D:28 mm; rs min:0.3 mm; Mass:0.02 kg; Dynamic load, C:5.1 kN; Characteristic rolling element frequency, BSF:4.07 Hz; Radial clearance class:C3; Characteristic outer ring frequency, BPF0:3.07 Hz; ra max:0.3 mm; |
| Case 16364A1 Hydraulic Final Drive Motor | Holder Surface Treatment:Not Provided; Shape:Flange Type; Number of Bearings:Double; RoHS:6; Bearing Retained:No; Bearing Material:Stainless Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Flange O.D. H(φ):60; |
| Case 87035344E Reman Hydraulic Final Drive Motor | Designation of closed end cover:SCC206; Weight:1.2 kg; A:40 mm; G:R1/8"; Recommended tightening torque for set screw:3.7 Nm; Designation of open end cover:SCOU206-19; Designation of bearing:UC206-19G2L4; H2:82 mm; H1:17 mm; C0:11.2 kN; |
| Case 420 1-SPD Reman Hydraulic Final Drive Motor | S:10.9 mm; Recommended tightening torque for set screw:11.5 Nm; N:18mm; T max.:200 °C; C0:23.2 kN; C:35.1 kN; Designation of open end cover:SCO210-50; H:190 mm; G:R1/8"; Designation of housing:FLE210N-; |
| Case CX290DLC SL Hydraulic Final Drive Motor | r:0.6; SW:4 mm; C:16 mm; D:62 mm; S:9 mm; C0:11.2 kN; d1:44.1 mm; B2:15.9 mm; G:M8x1; B:23.8 mm; |
| Case 87035452R Reman Hydraulic Final Drive Motor | Grease Reference Speed:11000 rpm; Clearance:C0 (Normal); Weight:0.15 Kg; Radius Rs min:1.000 mm; Cr - Dynamic Load Rating:15.9 kN; Outside Diameter D:62.000 mm; Oil Reference Speed:16000 rpm; Features:O.D. Groove; Bore Size d:35 mm; C0r - Static Load Rating:10.3 kN; |