| Case CX250DLC Hydraulic Final Drive Motor | S:6.5 mm; Z:22 mm; d1:27.2 mm; J:64 mm; e:15 mm; C0:4.78 kN; N:12mm; Recommended tightening torque for set screw:5.5 Nm; T max.:100 °C; A2:37.1 mm; |
| Case CK28 Hydraulic Final Drive Motor | C0:178 kN; Weight:38.3 kg; Designation of housing:FS322-; B:117 mm; T max.:100 °C; A:96 mm; S:46 mm; e:35 mm; d:110 mm; Recommended tightening torque for set screw:75 Nm; |
| Case 151890A1 Hydraulic Final Drive Motor | G:M6x1; Designation of housing:T207N-; Designation of bearing:US207-22G2; d:34.92 mm; Recommended tightening torque for set screw:8 Nm; L3:64 mm; N2:37 mm; L:129 mm; N:22mm; SW:3.97 mm; |
| Case 9010B Hydraulic Final Drive Motor | r - Cup Backface To Clear Radius1:0.030 in; Y - ISO Factor3:1.96; Series:3500; Db - Cup Backface Backing Diameter:3.03 in; D:3.4375 in; Design Units:Imperial; Da - Cup Frontface Backing Diameter:3.23 in; e - ISO Factor2:0.31; Cg - Geometry Factor:0.0808; Cup Part Number:3526; |
| Case 160558A1 Hydraulic Final Drive Motor | H:53.9 mm; C:31.85 kN; A1:33 mm; N:M12; Designation of bearing:EX209-26G2L4; B1:56.3 mm; Recommended tightening torque for set screw:8 Nm; A:54 mm; T max.:100 °C; B:42.8 mm; |
| Case CX160B Hydraulic Final Drive Motor | Fatigue limit load, Cu:2.36 kN; d:60 mm; f0:13.2; Dynamic load, C:82 kN; ra max:2 mm; Static load, C0:52 kN; da max:80.5 mm; Characteristic rolling element frequency, BSF:4.09 Hz; B:31 mm; D:130 mm; |
| Case 9050B Hydraulic Final Drive Motor | Cg - Geometry Factor:0.0668; C90 - Dynamic Radial Rating (90 million revolutions)4:3180 lbf; Cup Part Number:14273; C - Cup Width:16.955 mm; G1 - Heat Generation Factor (Roller-Raceway):18; a - Effective Center Location3:-4.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:12300 lbf; db - Cone Backface Backing Diameter:45.97 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; R - Cone Backface To Clear Radius1:3.560 mm; |
| Case 162165A1 Hydraulic Final Drive Motor | Designation of bearing:UC205-15G2T04; H2:51 mm; B:34 mm; A5:19.7 mm; Designation of housing:T205-; A1:12 mm; H:89 mm; L1:62 mm; L:97 mm; L3:51 mm; |
| Case CX290BLC Hydraulic Final Drive Motor | G:M6x1; d1:70 mm; A:44 mm; T max.:100 °C; C0:31.8 kN; d:41.28 mm; H3:125; L:160 mm; Designation of bearing:EX309-26G2L3; A1:18 mm; |
| Case 151018A1 Hydraulic Final Drive Motor | Number of Raceway Ring Rows:Double Row; Basic Load Rating, Dynamic Rating(N):121000; Load Direction:Radial; D:90; Raceway Ring Shape:Self-aligning roller; Retainer Type:Punching; d:40; Inner/Outer Ring Material:Steel; Shaft Bore Config.:Cylindrical Bore; |