| Case 440 2-SPD Reman Hydraulic Final Drive Motor | Dimension SA:3.39 in; Y1 - Geometry Factor:2.79; Dimension M:2.15 in; Pre Install Clearance Max:0.0026 in; Float:0.083 in; Locking Style:Single Concentric; Engineering Group:Mounted Bearing; Dimension D Max:8.63 in; Pre Install Clearance Min:0.0016 in; Dimension RA:0.21 in; |
| Case CK15 Hydraulic Final Drive Motor | T max.:100 °C; s1:39.7 mm; d1:62 mm; T min.:-20 °C; A1:16 mm; Weight:2.37 kg; Recommended tightening torque for set screw:11.5 Nm; Dz:95 mm; B:42.8 mm; G:M6x1; |
| Case CX240LR Hydraulic Final Drive Motor | Weight:0.84 kg; d:28.58 mm; S:15.9 mm; Designation of bearing:UC206-18G2L3; L:80 mm; e:19 mm; N:11,5mm; Recommended tightening torque for set screw:3.7 Nm; A1:12 mm; C:19.5 kN; |
| Case CK52 Hydraulic Final Drive Motor | Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):34100; Fit:J7; Stroke:No; Seal:Triple seals; Accessory:With cast iron cover; d:40; Bearing Inner Dia. Shape:Tapered hole adapter; Rolling Element Material:Bearing Steel; Basic Load Rating, Static Rating(N):21300; |
| Case CX31B Hydraulic Final Drive Motor | Bore Size d:17 mm; Oil Limiting Speed:24000 rpm; Outside Diameter D:35.000 mm; Features:Open; Weight:0.03 Kg; Clearance:C3; Outside Ring Width B:8.000 mm; Grease Limiting Speed:17000 rpm; Cr - Dynamic Load Rating:6 kN; C0r - Static Load Rating:3.3 kN; |
| Case 151754A1 Hydraulic Final Drive Motor | Nref:5,300 rpm; Min operating temperature, Tmin:-40 °C; da min:98 mm; d:85 mm; ra max:2.5 mm; Max operating temperature, Tmax:120 °C; Brand:SNR; D1:158.4 mm; Characteristic rolling element frequency, BSF:4.16 Hz; Static load, C0:96.8 kN; |
| Case CX28 Hydraulic Final Drive Motor | Shape:Flange Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Days to Ship:7 Days; Flange O.D. H(φ):72; Seals:DD (Contact Rubber S; Width T(mm):40; Bearing Material:[Steel] Steel; Bearing Part Number:6203; Bearing I.D. d(mm):17; |
| Case 87035451R Reman Hydraulic Final Drive Motor | Bearing Retained:Yes (with retaining; Number of Bearings:Single; Shape:Flange Type; Flange O.D. H(φ):69; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Electroless Nickel P; Volume Discount:Available; Seals:DD (Contact Rubber S; Days to Ship:7 Days; |
| Case CX240BLR Hydraulic Final Drive Motor | Weight / Kilogram:2.645; Min operating temperature, Tmin:-40 °C; Width:1.811 Inch | 46 Mill; Nlim (grease):4,800 rpm; UNSPSC:31171547; Retainer:Yes; Inventory:0.0; Harmonized Tariff Code:8482.50.00.00; Bore Profile:Straight; Weight / LBS:5.846; |
| Case 87035344E Reman Hydraulic Final Drive Motor | Designation of closed end cover:SCC206; Weight:1.2 kg; A:40 mm; G:R1/8"; Recommended tightening torque for set screw:3.7 Nm; Designation of open end cover:SCOU206-19; Designation of bearing:UC206-19G2L4; H2:82 mm; H1:17 mm; C0:11.2 kN; |