| Hitachi UH07-7 Hydraulic Fianla Drive Motor | Backing Housing Diameter Ds:446.0 mm; Backing Shaft Diameter ds:370.1 mm; Outer-Ring Set:378RXS1965A; Static Load Rating Co:4660 kN; Weight:394.200 lb; Width C:310.000 mm; Chamfer r1smin2:7.0 mm; Lubrication Groove g:16.0 mm; DUR/DOR F/E:378.000 mm; Inner-Ring Set:340ARXS1965A; |
| Hitachi ZX200 Hydraulic Fianla Drive Motor | Basic dynamic load rating (C):198000 kN; Width (mm):44.450; Outer Diameter (mm):127.000; Brand:NACHI; T:44.450 mm; Basic static load rating (C0):258000 kN; (Oil) Lubrication Speed:4200 r/min; Weight:2,74 Kg; Calculation factor (e):0.49; r1 min.:3.5 mm; |
| Hitachi 27U Hydraulic Fianla Drive Motor | Bore Diameter (mm):96,838; Width (mm):31,75; T:31,75 mm; Size (mm):96.838x149.225x31.75; Outer Diameter (mm):149,225; R:3,5 mm; Bearing number:42381/42587; d:96,838 mm; Brand:Timken; D:149,225 mm; |
| Hitachi EX200 Hydraulic Fianla Drive Motor | C1(2) - Dynamic Radial Rating (Two-Rows):2200000 N; Cage Material:Brass; d:240.000 mm; R - Inner Ring To Clear Radius1:3.0 mm; UPC Code:087796288409; r - Outer Ring To Clear Radius2:3.0 mm; Y2 - ISO Factor6:2.23; Cg - Geometry Factor8:0.1105; e - ISO Factor3:0.3; Reference Thermal Speed Rating (Oil)7:1100; |
| Hitachi EX60 Hydraulic Fianla Drive Motor | Mass bearing:1.21 kg; Basic dynamic load rating - C:63.7 kN; static load capacity:54 kN; snap ring included:Without Snap Ring; closure type:Open; Outer Diameter (mm):95; Snap Ring:No; Fatigue load limit - Pu:2.1 kN; UNSPSC:31171504; |
| Hitachi ZX120 Hydraulic Fianla Drive Motor | B:18 mm; Limiting Speed - Grease:4,800 rpm; D:130 mm; ra (max):1 mm; Groove Diameter:127.6 mm; r1:0.5 mm; Da (max):124 mm; Configuration:Single Row; Groove Width:1.3 mm; a (max):3.3 mm; |
| Hitachi ZX30U Hydraulic Fianla Drive Motor | B:375 mm; D:1180 mm; C:320 mm; Outer Diameter (mm):1180; Brand:ISO; Size (mm):900x1180x375; R:1040 mm; Bore Diameter (mm):900; Width (mm):375; Angle:3,2 °; |
| Hitachi ZX470 Hydraulic Fianla Drive Motor | Weight:25 Kg; d1:168,7 mm; Bearing number:NJ2324-E-MPA+HJ2324-; Size (mm):120x260x86; r4 min.:3 mm; r2 min.:3 mm; d:120 mm; B3:26 mm; Basic dynamic load rating (C):885 kN; D1:219 mm; |
| Hitachi ZX280 Hydraulic Fianla Drive Motor | Bearing number:SQZ 16 C RS-1; D2:27 mm; L:118 mm; Basic dynamic load rating (C):10 kN; S2:22 mm; L1:50 mm; D3:40 mm; d2:22 mm; d3:44 mm; L3:27 mm; |
| Hitachi ZX35 Hydraulic Fianla Drive Motor | db - Cone Backface Backing Diameter:28.35 in; a - Effective Center Location4:2.15 in; d:27.5000 in; C0 - Static Radial Rating:716000 lbf; G2 - Heat Generation Factor (Rib-Roller End):2090.8; G1 - Heat Generation Factor (Roller-Raceway):9940; K - Factor8:1.67; Cone Part Number:LL382149; Cg - Geometry Factor:0.274; R - Cone Backface To Clear Radius3:0.13 in; |