| No. | Brand | a | e | H | D | E | F | m | R |
| SK70SR-2 | Kobelco | - | - | 63.5 mm | - | - | - | - | - |
| SK135SR-1E | Kobelco | - | 0.22 | - | - | - | - | - | - |
| SK45SR | Kobelco | - | - | - | - | - | - | - | - |
| SK024 | Kobelco | - | - | - | 140 mm | - | - | - | - |
| SK60mark5 | Kobelco | - | - | 117 mm | - | - | - | - | - |
| SK13 | Kobelco | - | - | - | - | - | - | - | - |
| SK140SRLC | Kobelco | - | - | - | - | - | - | - | - |
| SK120LC-5 | Kobelco | - | - | 36.5 mm | - | - | - | - | - |
| YV15V00005F1 | Kobelco | - | - | - | - | - | - | - | - |
| SK60-6 | Kobelco | - | - | - | - | - | - | - | - |
| SK35SR | Kobelco | - | 19 mm | - | - | - | - | - | - |
| SK80 | Kobelco | - | - | 30.2 mm | - | - | - | - | - |
| SK135SRL-1E | Kobelco | - | 17 mm | - | - | - | - | - | - |
| SK160LC | Kobelco | - | 15 mm | - | - | - | - | - | - |
| SK300-4 | Kobelco | - | - | - | - | - | - | - | - |
| SK330LC | Kobelco | - | - | - | - | - | - | - | - |
| LP15V00001F1 | Kobelco | - | - | 53.9 mm | - | - | - | - | - |
| 11Y-27-30201 | Kobelco | - | - | - | - | - | - | - | - |
| SK025-2 | Kobelco | - | - | - | - | - | - | - | - |
| SK16 | Kobelco | - | - | - | - | - | - | - | - |
| SK16SR | Kobelco | - | - | 69.8 mm | - | - | - | - | - |
| SK80CS-1E | Kobelco | - | - | - | - | - | - | - | - |
| Kobelco SK150LC-4 Hydraulic Final Drive Motor | J:76.2 mm; Designation of open end cover:SCO206-30; Recommended tightening torque for set screw:5.5 Nm; B:38.1 mm; Designation of bearing:UC206G2T20; Z:52.3 mm; N:M10; H1:11 mm; Weight:0.96 kg; d:30 mm; |
| Kobelco LB15V00003F1 Hydraulic Final Drive Motor | Number of lubrication holes:3; ra max:2 mm; Static load, C0:893 kN; Characteristic outer ring frequency, BPF0:11.63 Hz; D:225 mm; Dynamic load, C:660 kN; D1:206.6 mm; Mass:7.5 kg; e:0.21; Da max:214.8 mm; |
| Kobelco SK15 Hydraulic Final Drive Motor | Weight:4.46 kg; L:140 mm; L1:118 mm; T max.:200 °C; Designation of bearing:EX212-39G2T20; Designation of housing:FA212-; A2:75.8 mm; d1:82 mm; J:202 mm; s1:53.2 mm; |
| Kobelco SK80 Aftermarket Hydraulic Final Drive Motor | Designation of bearing:EX202G2; T max.:100 °C; B:34 mm; L:76 mm; N:M10; H:30.2 mm; T min.:-20 °C; Weight:0.67 kg; d:15 mm; A:40 mm; |
| Kobelco SK024 Hydraulic Final Drive Motor | C0:54.2 kN; D:140 mm; Weight:2.79 kg; r:2; Recommended tightening torque for set screw:33 Nm; G:M12x1,25; d:80 mm; T min.:-20 °C; B:82.6 mm; T max.:100 °C; |
| Kobelco SK15SR Hydraulic Final Drive Motor | G:M6x1; J:52 mm; B:31 mm; T min.:-40 °C; A:40 mm; Weight:0.57 kg; C:12.8 kN; H2:62 mm; Designation of housing:PA204-; Designation of bearing:UC204G2T04; |
| Kobelco SK160LC Hydraulic Final Drive Motor | L1:54 mm; B:31 mm; J1:40 mm; C:12.8 kN; e:15 mm; Designation of housing:FA204-; Weight:0.47 kg; T min.:-40 °C; A2:33.3 mm; G:M6x1; |
| Kobelco 207-27-00570 Eaton Hydraulic Final Drive Motor | J:64 mm; C0:4.78 kN; Weight:0.4 kg; S:6 mm; T max.:100 °C; G:M6x1; A:25.5 mm; e:15 mm; B:22 mm; Designation of bearing:US202-10G2; |
| Kobelco SK130 Hydraulic Final Drive Motor | Bearing Insert Material:Steel; Seal Size:1.6875 in; Housing Coating:Powder Coat; Oil Pump Indicator:NO; Housing Type:Standard Plain Water; Seal Type:Auxiliary Dust Seal; Liner Type:WATER COOLED REPLACE; Vibration Sensor Indicator:No; Base to Center Hight Numeric:3.1250 in; UPC:782475741717; |
| Kobelco SK300LC-4 Hydraulic Final Drive Motor | C0:20.8 kN; H2:106 mm; Recommended tightening torque for set screw:8 Nm; E:22 mm; Designation of bearing:UC209-28G2L4; T max.:100 °C; H:53.9 mm; J:85 mm; H1:20 mm; B:49.2 mm; |
Kobelco 11Y-27-30101 Reman Hydraulic Final Drive Motor Video