| Kobelco SK235SR-1E Hydraulic Final Drive Motor | d1:57 mm; Static load, C0:20.7 kN; Brand:SNR; f0:14.4; rs min:1.1 mm; Characteristic outer ring frequency, BPF0:4.09 Hz; Radial clearance class:C3; Max operating temperature, Tmax:120 °C; Fatigue limit load, Cu:0.94 kN; Dynamic load, C:31.2 kN; |
| Kobelco 208-27-00311 Aftermarket Hydraulic Final Drive Motor | S:21.4 mm; L:108 mm; T min.:-40 °C; B1:56.3 mm; e:22 mm; Weight:2.07 kg; G:M6x1; d1:62 mm; T max.:100 °C; L1:90 mm; |
| Kobelco LB15V00003F1 Hydraulic Final Drive Motor | Number of lubrication holes:3; ra max:2 mm; Static load, C0:893 kN; Characteristic outer ring frequency, BPF0:11.63 Hz; D:225 mm; Dynamic load, C:660 kN; D1:206.6 mm; Mass:7.5 kg; e:0.21; Da max:214.8 mm; |
| Kobelco SK70SR-1ES Aftermarket Hydraulic Final Drive Motor | Seal Type:Triple Lip; Shaft Attachment (2):Set Screw; Retainer Material:Polymer; Housing Type:2 Bolt Pillow Block; Ball Material:440 STAINLESS STEEL; Housing Coating:No Coating; Grease Type:Mobilgrease FM222; Bearing Inner Ring Material:Stainless Steel; Max Bearing Speed:6000 rpm; Expansion Type:Non-Expansion; |
| Kobelco SK45SR Hydraulic Final Drive Motor | A1:12 mm; T max.:100 °C; T min.:-20 °C; s1:24.2 mm; N:10mm; B1:30.9 mm; C0:6.65 kN; C:12.8 kN; B:21.4 mm; J:78 mm; |
| Kobelco SK115SRDZ Hydraulic Final Drive Motor | H2:70 mm; C0:7.88 kN; H1:15 mm; L:75 mm; Weight:0.7 kg; G:M6x1; s1:17 mm; T max.:200 °C; Recommended tightening torque for set screw:3.7 Nm; L1:25 mm; |
| Kobelco 203-27-00204 Aftermarket Hydraulic Final Drive Motor | G:M6x1; C:14 kN; s1:30.9 mm; T max.:100 °C; H1:76 mm; S:17.4 mm; L:97 mm; N1:16 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of bearing:EX205-14G2; |
| Kobelco YX15V00003F4 Hydraulic Final Drive Motor | Designation of open end cover:SCOU207-23; T min.:-40 °C; A1:30 mm; H2:140 mm; G:M6x1; Designation of housing:PH207N-; Weight:2.2 kg; Z:58.4 mm; H1:19 mm; L:167 mm; |
| Kobelco 20T-60-72120 Hydraulic Final Drive Motor | d:17 mm; Da max:28 mm; Radial clearance class:CN; Mass:0.02 kg; D:30 mm; Fatigue limit load, Cu:0.12 kN; da max:20 mm; Min operating temperature, Tmin:-25 °C; f0:14.7; Dynamic load, C:4.65 kN; |
| Kobelco SK35 Hydraulic Final Drive Motor | d:1.4375 in; Flinger Type:Rubberized; Bearing Inner Ring Material:Steel; Housing Type:2 Bolt Pillow Block; Housing Material:Cast Iron; Ship Weight:5.39 LB; Bearing Insert Material:Steel; Ball Grade:Class 10; UPC:782475888672; Ball Material:Steel; |