| Kobelco SK27SR-5 Hydraulic Final Drive Motor | H1:22.5 mm; A1:35 mm; C0:29.2 kN; N1:30 mm; Weight:3.47 kg; T max.:200 °C; C:43.55 kN; H2:124.5 mm; A:60 mm; B:55.6 mm; |
| Kobelco 207-27-00372 Hydraulic Final Drive Motor | H:36.5 mm; C:14 kN; L1:25 mm; s1:17 mm; A:38 mm; N:M10; Recommended tightening torque for set screw:3.7 Nm; A1:25 mm; Designation of housing:PG205-; J:50 mm; |
| Kobelco SK160LC Hydraulic Final Drive Motor | L1:54 mm; B:31 mm; J1:40 mm; C:12.8 kN; e:15 mm; Designation of housing:FA204-; Weight:0.47 kg; T min.:-40 °C; A2:33.3 mm; G:M6x1; |
| Kobelco 20T-60-78120 Hydraulic Final Drive Motor | Min operating temperature, Tmin:-40 °C; da max:105 mm; da min:99 mm; Characteristic outer ring frequency, BPF0:6.85 Hz; F:107 mm; rs min:2 mm; Internal Clearance:C3-Loose; Inventory:0.0; Snap Ring:No; Rolling Element:Cylindrical Roller B; |
| Kobelco PH15V00009F2 Hydraulic Final Drive Motor | C0:96.5 kN; Weight:6.76 kg; m:16 mm; C:46 mm; G:5/8-18UNF; D:180 mm; B:96 mm; C1:15.5 mm; d:82.55 mm; SW:7.94 mm; |
| Kobelco PV15V00002F1 Hydraulic Final Drive Motor | Nlim (grease):2,400 rpm; C:28 mm; d:35 mm; Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; Bearing with/without cage:Sans; Characteristic rolling element frequency, BSF:7.25 Hz; Lw:9 mm; R:500 mm; D:72 mm; |
| Kobelco 20T-60-76710 Hydraulic Final Drive Motor | Precision class:P0; Fw:12 mm; C:11.8 mm; D:24 mm; Max operating temperature, Tmax:120 °C; Mass:0.03 kg; Nlim (grease):10,000 rpm; Track load capacity spherical outer ring:1.9 kN; Brand:NTN; Cr:5.15 kN; |
| Kobelco SK100L Hydraulic Final Drive Motor | P:300 mm; B:65.1 mm; s1:32.55 mm; C:52.5 kN; T max.:100 °C; T min.:-40 °C; C0:32.8 kN; A5:39.7 mm; SW:4.76 mm; Designation of bearing:UC212-36G2T04; |
| Kobelco LQ15V00019F1 Hydraulic Final Drive Motor | Characteristic outer ring frequency, BPF0:5.58 Hz; Dynamic load, C:27.5 kN; rs min:1.1 mm; Static load, C0:21.3 kN; B:18 mm; Max operating temperature, Tmax:120 °C; d:55 mm; d1:65.7 mm; Brand:SNR; f0:15.4; |
| Kobelco SK60-2 Aftermarket Hydraulic Final Drive Motor | L:116 mm; Weight:2.24 kg; A2:56.6 mm; Recommended tightening torque for set screw:16.8 Nm; N:18mm; A:41.6 mm; A1:13 mm; T max.:100 °C; s1:25.8 mm; Designation of housing:FLE210N-; |