| No. | Brand | a | e | H | D | E | F | m | R |
| SK120-4 | Kobelco | - | - | 55.6 mm | - | - | - | - | - |
| SK25SR | Kobelco | - | - | - | - | - | - | 9.8 mm | - |
| SK025 | Kobelco | - | - | 98 mm | - | - | - | - | - |
| SK20SR | Kobelco | - | - | 98 mm | - | - | - | - | - |
| SK250-4 | Kobelco | - | - | - | - | - | - | - | - |
| YM15V00001F2 | Kobelco | - | - | - | - | - | - | - | - |
| SK60mark4 | Kobelco | - | - | - | - | - | - | - | - |
| LQ15V00003F2 | Kobelco | - | - | 53.9 mm | - | - | - | - | - |
| PY15V00005F1 | Kobelco | - | - | - | - | - | - | - | - |
| SK140SRLC | Kobelco | - | - | - | - | - | - | - | - |
| 207-27-00441 | Kobelco | - | - | 198 mm | - | - | - | - | - |
| SK70 | Kobelco | - | - | - | - | - | - | - | - |
| SK035 | Kobelco | - | - | 81 mm | - | - | - | - | - |
| SK160LC | Kobelco | - | 15 mm | - | - | - | - | - | - |
| SK100-4 | Kobelco | - | 19 mm | - | - | - | - | - | - |
| YT15V00012F2 | Kobelco | - | - | - | - | - | - | - | - |
| SK70SR-1ES | Kobelco | - | - | - | - | - | - | - | - |
| SK45SR-1 | Kobelco | - | - | - | - | - | - | - | - |
| 20T-60-76710 | Kobelco | - | - | - | 24 mm | - | - | - | - |
| SK120LC-3 | Kobelco | - | - | - | - | - | - | - | - |
| 11Y-27-30200 | Kobelco | - | - | - | - | - | - | - | - |
| SK15SR | Kobelco | - | - | - | - | - | - | - | - |
| 206-27-00423 | Kobelco | - | - | - | 110 mm | - | - | - | - |
| SK120-3 | Kobelco | - | - | - | - | - | - | - | - |
| SK15 | Kobelco | - | - | - | - | - | - | - | - |
| Kobelco YY15V00035F1 Hydraulic Final Drive Motor | L:167 mm; Designation of bearing:EX207-23G2T20; J:127 mm; d:36.51 mm; T min.:-20 °C; L1:56 mm; C:25.7 kN; H2:140 mm; Designation of housing:PH207-; Recommended tightening torque for set screw:8 Nm; |
| Kobelco LQ15V00007F2 Hydraulic Final Drive Motor | Dynamic Load Rating:44.9 kN; Oil Holes:2.5 mm; da:136 mm; B:20 mm; Da:153 mm; Static Load Rating:76.9 kN; Radius:1.5 mm; d:120 mm; D:170 mm; |
| Kobelco SK235SRLC-1ES Hydraulic Final Drive Motor | S:8 mm; C:19.5 kN; L1:72 mm; A:31 mm; B:30 mm; A1:14 mm; Weight:0.88 kg; A2:40 mm; T max.:100 °C; Recommended tightening torque for set screw:3.7 Nm; |
| Kobelco SK135SR-LC Hydraulic Final Drive Motor | Characteristic rolling element frequency, BSF:5.85 Hz; Dynamic load, C:13.2 kN; f0:14.8; Radial clearance class:CN; Fatigue limit load, Cu:0.38 kN; rs min:1 mm; ra max:1 mm; Characteristic cage frequency, FTF:0.42 Hz; B:13 mm; Characteristic outer ring frequency, BPF0:4.59 Hz; |
| Kobelco 203-60-63102 Aftermarket Hydraulic Final Drive Motor | T min.:-20 °C; H2:64 mm; T max.:100 °C; H1:14.5 mm; d:12.7 mm; H:33.3 mm; N1:19 mm; Recommended tightening torque for set screw:3.7 Nm; G:R1/8"; C0:6.65 kN; |
| Kobelco SK210-4 Hydraulic Final Drive Motor | S:6 mm; L:86 mm; B:22 mm; N:11,5mm; s1:11 mm; e:19 mm; Weight:0.4 kg; A:29.5 mm; C0:4.78 kN; d:15.88 mm; |
| Kobelco SK25 Hydraulic Final Drive Motor | Nlim:4,200 rpm; D:120 mm; Mass:1.38 kg; Radial clearance class:CN; D1:102.3 mm; Min operating temperature, Tmin:-20 °C; da max:69 mm; Characteristic cage frequency, FTF:0.38 Hz; Da max:111 mm; da min:64 mm; |
| Kobelco SK150LC-4 Hydraulic Final Drive Motor | J:76.2 mm; Designation of open end cover:SCO206-30; Recommended tightening torque for set screw:5.5 Nm; B:38.1 mm; Designation of bearing:UC206G2T20; Z:52.3 mm; N:M10; H1:11 mm; Weight:0.96 kg; d:30 mm; |
| Kobelco SK35SR Hydraulic Final Drive Motor | C0:6.65 kN; C:12.8 kN; A2:37.3 mm; J:63.5 mm; Dz:54 mm; S:12.7 mm; Designation of open end cover:SCO204-12; e:19 mm; T min.:-20 °C; Weight:0.74 kg; |
| Kobelco SK120LC-5 Hydraulic Final Drive Motor | s1:17 mm; H1:14.5 mm; H:36.5 mm; Dz:60 mm; C0:7.88 kN; Weight:0.74 kg; N1:19 mm; Recommended tightening torque for set screw:5.5 Nm; S:14.3 mm; B:34 mm; |
Kobelco 20R-60-72120 Hydraulic Final Drive Motor Video