| Kobelco YX15V00003F4 Hydraulic Final Drive Motor | Designation of open end cover:SCOU207-23; T min.:-40 °C; A1:30 mm; H2:140 mm; G:M6x1; Designation of housing:PH207N-; Weight:2.2 kg; Z:58.4 mm; H1:19 mm; L:167 mm; |
| Kobelco SK60 Aftermarket Hydraulic Final Drive Motor | B:12 mm; Static load, C0:4.2 kN; ra max:1 mm; Dynamic load, C:9.7 kN; Fatigue limit load, Cu:0.19 kN; Radial clearance class:CM; Characteristic rolling element frequency, BSF:2.76 Hz; Characteristic outer ring frequency, BPF0:2.03 Hz; da min:17 mm; Da max:32 mm; |
| Kobelco SK115SR Hydraulic Final Drive Motor | r:0.6; D:47 mm; C0:6.65 kN; Recommended tightening torque for set screw:5.5 Nm; d:20 mm; S:12.7 mm; T max.:100 °C; T min.:-20 °C; G:M6x1; Weight:0.17 kg; |
| Kobelco SK80SR Aftermarket Hydraulic Final Drive Motor | Max operating temperature, Tmax:110 °C; d:40 mm; rs min:1.1 mm; Nlim (grease):5,600 rpm; Min operating temperature, Tmin:-25 °C; Characteristic outer ring frequency, BPF0:3.61 Hz; B:18 mm; Mass:0.37 kg; Fatigue limit load, Cu:0.81 kN; Radial clearance class:C3; |
| Kobelco YV15V00005F1 Hydraulic Final Drive Motor | A1:60 mm; Weight:13 kg; Recommended tightening torque for set screw:27.1 Nm; T max.:100 °C; N1:40 mm; T min.:-20 °C; L:360 mm; Designation of housing:P314-; A:90 mm; C0:68 kN; |
| Kobelco 201-60-00120 Aftermarket Hydraulic Final Drive Motor | E:20 mm; J:80 mm; Designation of housing:PA207N-; Designation of closed end cover:SCC207; Weight:1.58 kg; s1:21.45 mm; Designation of bearing:UC207G2; C0:15.2 kN; A1:27 mm; Dz:80 mm; |
| Kobelco SK025 Hydraulic Final Drive Motor | A5:18.8 mm; B:37.6 mm; Recommended tightening torque for set screw:11.5 Nm; d1:51.1 mm; L:274 mm; s1:36.3 mm; H:98 mm; H2:41 mm; Dz:80 mm; L1:225 mm; |
| Kobelco SK70UR Aftermarket Hydraulic Final Drive Motor | A2:40.2 mm; s1:19.05 mm; T min.:-20 °C; Dz:70 mm; e:18 mm; Weight:1.16 kg; L:108 mm; Designation of housing:F206N-; B:38.1 mm; A:31 mm; |
| Kobelco SK60mark3 Aftermarket Hydraulic Final Drive Motor | E:20 mm; H2:115 mm; T max.:100 °C; L1:33.5 mm; B:51.6 mm; Z:24.5 mm; H:57.2 mm; C:35.1 kN; d:50 mm; Weight:2.4 kg; |
| Kobelco 203-60-56701 Hydraulic Final Drive Motor | Flinger Type:None; Bearing Family:Setscrew Ball Bearin; Bearing Locking Device:Setscrew; Flinger Material:None; Bearing Insert Material:Steel; Housing Material:Cast Iron; Retainer Type:Std Retainer; Retainer Material:Nylon; Grease Type:Unirex N2; Ball Grade:Class 10; |