| Kobelco SK135SR Hydraulic Final Drive Motor | S:10.2 mm; L:144 mm; H:117 mm; C0:20.8 kN; N2:49 mm; Designation of bearing:US209-27G2T20; L3:83 mm; C:31.85 kN; Designation of open end cover:SCOU209-27; A1:16 mm; |
| Kobelco 11Y-27-30202 Reman Hydraulic Final Drive Motor | Fatigue limit load, Cu:0.19 kN; Characteristic outer ring frequency, BPF0:2.03 Hz; Radial clearance class:CM; Dynamic load, C:9.7 kN; Brand:NTN; Nlim (grease):20,000 rpm; Characteristic cage frequency, FTF:0.34 Hz; da min:17 mm; Min operating temperature, Tmin:-40 °C; Static load, C0:4.2 kN; |
| Kobelco PM15V00021F1R Hydraulic Final Drive Motor | N1:16 mm; d:20 mm; G:M6x1; N2:32 mm; H2:51 mm; C0:6.65 kN; T min.:-40 °C; S:12.7 mm; T max.:100 °C; A5:18.3 mm; |
| Kobelco SK35SR-3 Hydraulic Final Drive Motor | J:157 mm; s1:25.8 mm; e:22 mm; Designation of bearing:SUC210-31; C0:23.7 kN; d:49.21 mm; T max.:100 °C; H:190 mm; B:51.6 mm; A:39 mm; |
| Kobelco 206-27-00423 Aftermarket Hydraulic Final Drive Motor | Min operating temperature, Tmin:-20 °C; da min:59 mm; B:27 mm; Dynamic load, C:62 kN; ra max:2 mm; Characteristic cage frequency, FTF:0.38 Hz; Fatigue limit load, Cu:1.75 kN; Brand:NTN; D:110 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; |
| Kobelco 20c-60-32600 Hydraulic Final Drive Motor | A:43 mm; Z:39.3 mm; S:22.2 mm; J1:86 mm; T max.:100 °C; L:130 mm; N:16mm; G:M6x1; Designation of bearing:UC211G2T04; T min.:-40 °C; |
| Kobelco SK16 Hydraulic Final Drive Motor | Recommended tightening torque for set screw:22 Nm; J:150 mm; S:22.2 mm; G:M6x1; T min.:-20 °C; Weight:3.93 kg; L:185 mm; H3:125; C0:29.2 kN; A2:46.4 mm; |
| Kobelco SK035 Hydraulic Final Drive Motor | A1:4 mm; A2:22.1 mm; Designation of housing:PF203-; s1:23.05 mm; C:9.55 kN; H:81 mm; B1:28.6 mm; T min.:-20 °C; T max.:100 °C; N:7,1mm; |
| Kobelco 201-60-00120 Aftermarket Hydraulic Final Drive Motor | E:20 mm; J:80 mm; Designation of housing:PA207N-; Designation of closed end cover:SCC207; Weight:1.58 kg; s1:21.45 mm; Designation of bearing:UC207G2; C0:15.2 kN; A1:27 mm; Dz:80 mm; |
| Kobelco SK350-8 Hydraulic Final Drive Motor | Recommended tightening torque for set screw:11.5 Nm; N:14mm; Designation of housing:F207N-; T min.:-20 °C; S:9.5 mm; J:92 mm; s1:30.2 mm; G:M6x1; d:35 mm; C:25.7 kN; |