| No. | Brand | a | e | H | D | E | F | m | R |
| SK115SR | Kobelco | - | - | - | 47 mm | - | - | - | - |
| LQ15V00003F3 | Kobelco | - | - | - | - | - | - | - | - |
| SK250-4 | Kobelco | - | - | - | - | - | - | - | - |
| YY35D00007F1 | Kobelco | 210 mm | - | - | - | - | - | - | - |
| SK014 | Kobelco | - | - | - | - | - | - | - | - |
| 11Y-27-30101 | Kobelco | - | - | - | - | - | - | - | - |
| SK45SR-2 | Kobelco | - | - | - | 215 mm | - | - | - | - |
| SK70-2 | Kobelco | - | 29 mm | - | - | - | - | - | - |
| LE15V00002F1 | Kobelco | - | 22 mm | - | - | - | - | - | - |
| SK235SRLC-1E | Kobelco | - | - | - | - | - | - | - | - |
| SK210-4 | Kobelco | - | 19 mm | - | - | - | - | - | - |
| SK60mark5 | Kobelco | - | - | 117 mm | - | - | - | - | - |
| S190311-3700 | Kobelco | - | - | - | - | - | - | - | - |
| SK60-6 | Kobelco | - | - | - | - | - | - | - | - |
| SK70SR-2 | Kobelco | - | - | 63.5 mm | - | - | - | - | - |
| SK350-8 | Kobelco | - | - | - | - | - | - | - | - |
| SK70 | Kobelco | - | - | - | - | - | - | - | - |
| LC15V00023F2 | Kobelco | - | - | 42.9 mm | - | - | - | - | - |
| SK100-4 | Kobelco | - | 19 mm | - | - | - | - | - | - |
| 11Y-27-30102 | Kobelco | - | 11 mm | - | - | - | - | - | - |
| SK16 | Kobelco | - | - | - | - | - | - | - | - |
| SK70SR-1ES | Kobelco | - | - | - | - | - | - | - | - |
| PH15V00009F3 | Kobelco | - | - | - | - | - | - | - | - |
| Kobelco SK35SR-3 Hydraulic Final Drive Motor | J:157 mm; s1:25.8 mm; e:22 mm; Designation of bearing:SUC210-31; C0:23.7 kN; d:49.21 mm; T max.:100 °C; H:190 mm; B:51.6 mm; A:39 mm; |
| Kobelco SK60-2 Aftermarket Hydraulic Final Drive Motor | L:116 mm; Weight:2.24 kg; A2:56.6 mm; Recommended tightening torque for set screw:16.8 Nm; N:18mm; A:41.6 mm; A1:13 mm; T max.:100 °C; s1:25.8 mm; Designation of housing:FLE210N-; |
| Kobelco YN15V00051F5 Hydraulic Final Drive Motor | Weight:0.87 kg; H1:11 mm; H:42.9 mm; d:30 mm; G:R1/8"; N:M10; E:12.5 mm; H2:82 mm; J:76.2 mm; C0:11.2 kN; |
| Kobelco SK025 Hydraulic Final Drive Motor | A5:18.8 mm; B:37.6 mm; Recommended tightening torque for set screw:11.5 Nm; d1:51.1 mm; L:274 mm; s1:36.3 mm; H:98 mm; H2:41 mm; Dz:80 mm; L1:225 mm; |
| Kobelco 207-27-00441 Hydraulic Final Drive Motor | N2:73 mm; C:83.2 kN; H:198 mm; N1:38 mm; Designation of bearing:UC217G2T20; G:M10x1; s1:42.85 mm; d:85 mm; A5:51.6 mm; A2:54 mm; |
| Kobelco SK45 Hydraulic Final Drive Motor | A1:22 mm; L1:22 mm; Designation of housing:PA204N-; H:30.2 mm; E:13 mm; N:M10; T min.:-20 °C; Designation of bearing:UC203-11G2; C:12.8 kN; B:31 mm; |
| Kobelco SK120LC-3 Hydraulic Final Drive Motor | Characteristic outer ring frequency, BPF0:4.1 Hz; da max:119 mm; d1:119 mm; Dynamic load, C:121 kN; d:100 mm; ra max:2 mm; Da max:169 mm; Brand:SNR; Characteristic cage frequency, FTF:0.41 Hz; Max operating temperature, Tmax:120 °C; |
| Kobelco SK330 Hydraulic Final Drive Motor | H:78 mm; C0:7.88 kN; Recommended tightening torque for set screw:3.7 Nm; Z:17 mm; Designation of housing:SP203-205/52N-; SW:3.18 mm; C:14 kN; B:34 mm; G:R1/8"; Weight:1.51 kg; |
| Kobelco LC15V00023F2 Hydraulic Final Drive Motor | H1:17 mm; Recommended tightening torque for set screw:5.5 Nm; L:158 mm; d:30 mm; A:40 mm; Designation of open end cover:SCO206-30; L1:47 mm; H:42.9 mm; T max.:100 °C; S:15.9 mm; |
| Kobelco SK14 Hydraulic Final Drive Motor | A:38 mm; Designation of housing:F209-; d1:62 mm; A1:16 mm; N:16mm; T max.:200 °C; Weight:2.23 kg; C:31.85 kN; G:M6x1; L:137 mm; |
Kobelco SK20SR Hydraulic Final Drive Motor Video