| Kobelco SK115SR Hydraulic Final Drive Motor | r:0.6; D:47 mm; C0:6.65 kN; Recommended tightening torque for set screw:5.5 Nm; d:20 mm; S:12.7 mm; T max.:100 °C; T min.:-20 °C; G:M6x1; Weight:0.17 kg; |
| Kobelco PM15V00021F1 Hydraulic Final Drive Motor | Characteristic cage frequency, FTF:0.4 Hz; D:100 mm; Category:Bearings; d:45 mm; Minimum Buy Quantity:N/A; rs min:1.5 mm; ra max:1.5 mm; Da max:92 mm; dc min:66 mm; Radial clearance class:CN; |
| Kobelco SK135SR-LC Hydraulic Final Drive Motor | Characteristic rolling element frequency, BSF:5.85 Hz; Dynamic load, C:13.2 kN; f0:14.8; Radial clearance class:CN; Fatigue limit load, Cu:0.38 kN; rs min:1 mm; ra max:1 mm; Characteristic cage frequency, FTF:0.42 Hz; B:13 mm; Characteristic outer ring frequency, BPF0:4.59 Hz; |
| Kobelco PV15V00002F1 Hydraulic Final Drive Motor | Nlim (grease):2,400 rpm; C:28 mm; d:35 mm; Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; Bearing with/without cage:Sans; Characteristic rolling element frequency, BSF:7.25 Hz; Lw:9 mm; R:500 mm; D:72 mm; |
| Kobelco SK014 Hydraulic Final Drive Motor | d:35 mm; N1:21 mm; H2:94 mm; T max.:100 °C; C0:15.2 kN; L1:54 mm; s1:21.45 mm; N:17mm; C:25.7 kN; G:M6x1; |
| Kobelco LF15V00002F1 Aftermarket Hydraulic Final Drive Motor | A2:39.4 mm; C0:7.88 kN; B1:30.9 mm; J:98 mm; N:12mm; Designation of bearing:ES205G2T20; T min.:-20 °C; d1:37.4 mm; H:125 mm; A:27 mm; |
| Kobelco SK330 MARK9 Hydraulic Final Drive Motor | Designation of housing:T209N-; A2:35 mm; H:117 mm; A1:16 mm; B:42.8 mm; s1:39.7 mm; SW:4 mm; C:31.85 kN; Z:24.4 mm; Weight:2.47 kg; |
| Kobelco SK60mark5 Aftermarket Hydraulic Final Drive Motor | T min.:-40 °C; Designation of housing:T209N-; H:117 mm; N:29mm; N2:49 mm; A1:16 mm; B:41.2 mm; A5:31 mm; C0:20.8 kN; G:M6x1; |
| Kobelco SK100-4 Hydraulic Final Drive Motor | e:19 mm; Z:27 mm; s1:17 mm; T max.:100 °C; J:70 mm; A1:11 mm; Weight:0.8 kg; Designation of housing:FE205N-; B:34 mm; Designation of bearing:UC205-16G2L3; |
| Kobelco SK300-4 Hydraulic Final Drive Motor | T min.:-20 °C; G:R1/8"; Weight:0.77 kg; C:12.8 kN; A:29.5 mm; L:86 mm; s1:30.5 mm; d:15.88 mm; Recommended tightening torque for set screw:3.7 Nm; N:11,5mm; |