| Kobelco YX15V00003F1 Hydraulic Final Drive Motor | Flinger Type:Rubberized; Shaft Attachment (2):Set Screw; Ship Weight:4.28 LB; Bearing Insert Material:Steel; Housing Material:Cast Iron; Housing Type:Narrow Slot Take-Up; Seal Type:Single Lip; Bearing Bore Shape:Round; Ball Material:Steel; Max Bearing Speed:5000 rpm; |
| Kobelco PH15V00009F3 Hydraulic Final Drive Motor | Designation of bearing:EX206-20G2; H1:17 mm; Weight:1.18 kg; J:60 mm; d:31.75 mm; T max.:100 °C; C:19.5 kN; B1:48.3 mm; A:48 mm; L1:25 mm; |
| Kobelco SK250LC-4 Hydraulic Final Drive Motor | Characteristic rolling element frequency, BSF:4.1 Hz; Brand:NTN; Min operating temperature, Tmin:-20 °C; Dynamic load, C:104 kN; f0:13.2; Nlim (grease):4,600 rpm; Mass:2.52 kg; Characteristic inner ring frequency, BPFI:4.92 Hz; Radial clearance class:CN; Characteristic cage frequency, FTF:0.38 Hz; |
| Kobelco SK160LC-6E Hydraulic Final Drive Motor | Designation of housing:FL205N-; S:7.5 mm; A1:13 mm; A2:39.4 mm; L:68 mm; Designation of open end cover:SCOE205-25; Recommended tightening torque for set screw:5.5 Nm; C0:7.88 kN; J:99 mm; G:M6x1; |
| Kobelco 20R-60-72120 Hydraulic Final Drive Motor | A5:25.4 mm; Weight:2.04 kg; Designation of closed end cover:SCC207; T max.:200 °C; Designation of housing:SP206-207/72N-; SW:3.97 mm; Dz:80 mm; T min.:-20 °C; s1:21.45 mm; H2:41 mm; |
| Kobelco SK80 Aftermarket Hydraulic Final Drive Motor | Designation of bearing:EX202G2; T max.:100 °C; B:34 mm; L:76 mm; N:M10; H:30.2 mm; T min.:-20 °C; Weight:0.67 kg; d:15 mm; A:40 mm; |
| Kobelco SK250-6ES Hydraulic Final Drive Motor | S:17 mm; E:13 mm; d1:32.4 mm; C0:6.65 kN; A1:22 mm; G:M6x1; L1:22 mm; B1:43.5 mm; T max.:100 °C; Designation of bearing:EX202G2L4; |
| Kobelco SK150LC-3 Hydraulic Final Drive Motor | bore diameter:15 mm; Bore:0.591 Inch | 15 Mill; Mass:0.08 kg; Precision Class:ABEC 1 | ISO P0; overall width:13 mm; Noun:Bearing; Rolling Element:Ball Bearing; maximum rpm (oil):21000 rpm; Internal Special Features:No; Nlim (grease):17,000 rpm; |
| Kobelco 203-60-56701 Hydraulic Final Drive Motor | Flinger Type:None; Bearing Family:Setscrew Ball Bearin; Bearing Locking Device:Setscrew; Flinger Material:None; Bearing Insert Material:Steel; Housing Material:Cast Iron; Retainer Type:Std Retainer; Retainer Material:Nylon; Grease Type:Unirex N2; Ball Grade:Class 10; |
| Kobelco SK250LC-6ES Hydraulic Final Drive Motor | Min operating temperature, Tmin:-20 °C; Brand:NTN; B:10.5 mm; Max operating temperature, Tmax:120 °C; d1:67 mm; rs min:1.1 mm; d:115 mm; Bearing ring (inner ring) WS mass:0.58 kg; |