| Kobelco SK100 Hydraulic Final Drive Motor | Snap Ring:No; Product Group:B00308; Bore:0.984 Inch | 25 Mill; Noun:Bearing; da min:30 mm; Fatigue limit load, Cu:0.36 kN; ra max:1 mm; Characteristic inner ring frequency, BPFI:5.42 Hz; Category:Single Row Ball Bear; Static load, C0:7.85 kN; |
| Kobelco LP15V00001F1 Hydraulic Final Drive Motor | H:53.9 mm; Recommended tightening torque for set screw:11.5 Nm; J:95.3 mm; A1:32 mm; H1:14 mm; L:120 mm; T min.:-20 °C; B:49.2 mm; T max.:100 °C; A:48 mm; |
| Kobelco SK16 Hydraulic Final Drive Motor | Recommended tightening torque for set screw:22 Nm; J:150 mm; S:22.2 mm; G:M6x1; T min.:-20 °C; Weight:3.93 kg; L:185 mm; H3:125; C0:29.2 kN; A2:46.4 mm; |
| Kobelco SK135SRLC-2 Hydraulic Final Drive Motor | H1:15 mm; s1:23.05 mm; d:17 mm; A1:22 mm; Recommended tightening torque for set screw:5.5 Nm; B:19.1 mm; L:127 mm; C0:4.78 kN; N1:19 mm; B1:28.6 mm; |
| Kobelco SK60 Aftermarket Hydraulic Final Drive Motor | B:12 mm; Static load, C0:4.2 kN; ra max:1 mm; Dynamic load, C:9.7 kN; Fatigue limit load, Cu:0.19 kN; Radial clearance class:CM; Characteristic rolling element frequency, BSF:2.76 Hz; Characteristic outer ring frequency, BPF0:2.03 Hz; da min:17 mm; Da max:32 mm; |
| Kobelco SK115SR Hydraulic Final Drive Motor | r:0.6; D:47 mm; C0:6.65 kN; Recommended tightening torque for set screw:5.5 Nm; d:20 mm; S:12.7 mm; T max.:100 °C; T min.:-20 °C; G:M6x1; Weight:0.17 kg; |
| Kobelco 203-27-00202 Hydraulic Final Drive Motor | N:12mm; H:113 mm; B1:43.5 mm; Weight:0.61 kg; d:15 mm; C:12.8 kN; A1:11 mm; Designation of closed end cover:SCCE204; s1:30.5 mm; Z:46.2 mm; |
| Kobelco 208-27-00311 Aftermarket Hydraulic Final Drive Motor | S:21.4 mm; L:108 mm; T min.:-40 °C; B1:56.3 mm; e:22 mm; Weight:2.07 kg; G:M6x1; d1:62 mm; T max.:100 °C; L1:90 mm; |
| Kobelco SK80 Aftermarket Hydraulic Final Drive Motor | Designation of bearing:EX202G2; T max.:100 °C; B:34 mm; L:76 mm; N:M10; H:30.2 mm; T min.:-20 °C; Weight:0.67 kg; d:15 mm; A:40 mm; |
| Kobelco YX15V00003F4R Hydraulic Final Drive Motor | Dynamic load, C:25.7 kN; Radial clearance class:CN; Characteristic cage frequency, FTF:0.4 Hz; d:35 mm; Max operating temperature, Tmax:110 °C; Mass:0.29 kg; Characteristic rolling element frequency, BSF:4.61 Hz; f0:13.8; Brand:NTN; D:72 mm; |