| Kobelco LQ15V00003F3 Hydraulic Final Drive Motor | Expansion Type:Non-Expansion; UPC:782476371876; Manufacturing Plant Location:Rogersville, TN; Housing Type:Wide Slot Take-Up; Self Aligning:Self Centering; Shaft Attachment (2):Set Screw; Anti-Rotation Pin:Yes; Base to Center Height:Standard; Ball Grade:Class 10; Bearing Insert Material:Steel; |
| Kobelco 20R-60-72120 Hydraulic Final Drive Motor | A5:25.4 mm; Weight:2.04 kg; Designation of closed end cover:SCC207; T max.:200 °C; Designation of housing:SP206-207/72N-; SW:3.97 mm; Dz:80 mm; T min.:-20 °C; s1:21.45 mm; H2:41 mm; |
| Kobelco SK80SR Aftermarket Hydraulic Final Drive Motor | Max operating temperature, Tmax:110 °C; d:40 mm; rs min:1.1 mm; Nlim (grease):5,600 rpm; Min operating temperature, Tmin:-25 °C; Characteristic outer ring frequency, BPF0:3.61 Hz; B:18 mm; Mass:0.37 kg; Fatigue limit load, Cu:0.81 kN; Radial clearance class:C3; |
| Kobelco 201-60-28100 Aftermarket Hydraulic Final Drive Motor | Characteristic rolling element frequency, BSF:6.23 Hz; Dynamic load, C:472 kN; B:55 mm; da max:114.2 mm; rs min:2.1 mm; e:0.24; Y2:4.23; Characteristic inner ring frequency, BPFI:10.39 Hz; Brand:SNR; Min operating temperature, Tmin:-20 °C; |
| Kobelco SK150LC-4 Hydraulic Final Drive Motor | J:76.2 mm; Designation of open end cover:SCO206-30; Recommended tightening torque for set screw:5.5 Nm; B:38.1 mm; Designation of bearing:UC206G2T20; Z:52.3 mm; N:M10; H1:11 mm; Weight:0.96 kg; d:30 mm; |
| Kobelco PM15V00021F1R Hydraulic Final Drive Motor | N1:16 mm; d:20 mm; G:M6x1; N2:32 mm; H2:51 mm; C0:6.65 kN; T min.:-40 °C; S:12.7 mm; T max.:100 °C; A5:18.3 mm; |
| Kobelco SK70 Aftermarket Hydraulic Final Drive Motor | C0:15.6 kN; T min.:-20 °C; G:5/16-24UNF; C:20 mm; Weight:0.53 kg; d:31.75 mm; B:42.9 mm; C1:5.7 mm; T max.:100 °C; S:17.5 mm; |
| Kobelco LF15V00002F1 Aftermarket Hydraulic Final Drive Motor | A2:39.4 mm; C0:7.88 kN; B1:30.9 mm; J:98 mm; N:12mm; Designation of bearing:ES205G2T20; T min.:-20 °C; d1:37.4 mm; H:125 mm; A:27 mm; |
| Kobelco SK20SR Hydraulic Final Drive Motor | H2:41 mm; s1:15 mm; L1:225 mm; Weight:1.87 kg; H:98 mm; Designation of bearing:US206G2T04; d:30 mm; C0:11.2 kN; A:21 mm; Z:17 mm; |
| Kobelco 20P-60-81101 Hydraulic Final Drive Motor | Recommended tightening torque for set screw:22 Nm; H3:145; d1:86 mm; J:170 mm; C:57.2 kN; L:205 mm; Z:45.5 mm; Designation of bearing:EX213G2; Designation of housing:FC213N-; A:49 mm; |