| No. | Brand | a | e | H | D | E | F | m | R |
| SK024 | Kobelco | - | - | - | 140 mm | - | - | - | - |
| SK45 | Kobelco | - | - | 30.2 mm | - | 13 mm | - | - | - |
| 207-27-00560 | Kobelco | - | 29 mm | 250 mm | - | - | - | - | - |
| 11Y-27-30102 | Kobelco | - | 11 mm | - | - | - | - | - | - |
| SK70MSR | Kobelco | - | - | - | - | - | - | - | - |
| YT15V00012F2 | Kobelco | - | - | - | - | - | - | - | - |
| SK250-4 | Kobelco | - | - | - | - | - | - | - | - |
| SK130LC-4 | Kobelco | - | - | - | - | - | - | - | - |
| 20T-60-76710 | Kobelco | - | - | - | 24 mm | - | - | - | - |
| 203-60-63101 | Kobelco | - | 19 mm | - | - | - | - | - | - |
| SK135SR-1E | Kobelco | - | 0.22 | - | - | - | - | - | - |
| YY15V00015F1 | Kobelco | - | - | - | - | - | - | - | - |
| SK135SRL-1E | Kobelco | - | 17 mm | - | - | - | - | - | - |
| SK130LC | Kobelco | - | - | 63.5 mm | - | - | - | - | - |
| SK025 | Kobelco | - | - | 98 mm | - | - | - | - | - |
| SK25 | Kobelco | - | - | - | 120 mm | - | - | - | - |
| LB15V00003F1 | Kobelco | - | 0.21 | - | 225 mm | - | - | - | - |
| SK330 | Kobelco | - | - | 78 mm | - | - | - | - | - |
| SK210-4 | Kobelco | - | 19 mm | - | - | - | - | - | - |
| SK60-2 | Kobelco | - | - | - | - | - | - | - | - |
| 201-60-58101 | Kobelco | - | 18 mm | - | - | - | - | - | - |
| SK100-3 | Kobelco | - | - | 98 mm | - | - | - | - | - |
| SK350-9 | Kobelco | - | - | - | - | - | - | - | - |
| 207-27-00440 | Kobelco | - | - | - | - | - | - | - | - |
| Kobelco SK25SR-2 Hydraulic Final Drive Motor | N2:49 mm; A2:37 mm; L1:90 mm; T max.:100 °C; C:35.1 kN; A:49 mm; T min.:-20 °C; d1:67.2 mm; d:47.62 mm; G:M6x1; |
| Kobelco SK100 Hydraulic Final Drive Motor | Snap Ring:No; Product Group:B00308; Bore:0.984 Inch | 25 Mill; Noun:Bearing; da min:30 mm; Fatigue limit load, Cu:0.36 kN; ra max:1 mm; Characteristic inner ring frequency, BPFI:5.42 Hz; Category:Single Row Ball Bear; Static load, C0:7.85 kN; |
| Kobelco SK250LC Hydraulic Final Drive Motor | Ring Size:Standard; Expansion Type:Non-Expansion; Max Bearing Speed:7500 rpm; Seal Type:Single Lip; UPC:782475989911; Flinger Material:Steel; Bearing Outer Ring Material:Steel; d:2.0000 in; Brand:Baldor-Dodge; Flinger Type:Rubberized; |
| Kobelco SK025 Hydraulic Final Drive Motor | A5:18.8 mm; B:37.6 mm; Recommended tightening torque for set screw:11.5 Nm; d1:51.1 mm; L:274 mm; s1:36.3 mm; H:98 mm; H2:41 mm; Dz:80 mm; L1:225 mm; |
| Kobelco SK120LC-5 Hydraulic Final Drive Motor | s1:17 mm; H1:14.5 mm; H:36.5 mm; Dz:60 mm; C0:7.88 kN; Weight:0.74 kg; N1:19 mm; Recommended tightening torque for set screw:5.5 Nm; S:14.3 mm; B:34 mm; |
| Kobelco SK80 Aftermarket Hydraulic Final Drive Motor | Designation of bearing:EX202G2; T max.:100 °C; B:34 mm; L:76 mm; N:M10; H:30.2 mm; T min.:-20 °C; Weight:0.67 kg; d:15 mm; A:40 mm; |
| Kobelco SK80MSR Aftermarket Hydraulic Final Drive Motor | C1:5.8 mm; B:37.6 mm; C0:15.2 kN; T min.:-20 °C; B2:17.5 mm; Weight:0.66 kg; S:18.8 mm; C:20 mm; G:5/16-24UNF; Recommended tightening torque for set screw:8 Nm; |
| Kobelco SK130LC-4 Hydraulic Final Drive Motor | A:32 mm; B:34 mm; C:12.8 kN; C0:6.65 kN; Recommended tightening torque for set screw:3.7 Nm; L1:40 mm; H2:64 mm; B1:43.5 mm; s1:30.5 mm; T min.:-40 °C; |
| Kobelco SK300LC-4 Hydraulic Final Drive Motor | C0:20.8 kN; H2:106 mm; Recommended tightening torque for set screw:8 Nm; E:22 mm; Designation of bearing:UC209-28G2L4; T max.:100 °C; H:53.9 mm; J:85 mm; H1:20 mm; B:49.2 mm; |
| Kobelco YY15V00035F1 Hydraulic Final Drive Motor | L:167 mm; Designation of bearing:EX207-23G2T20; J:127 mm; d:36.51 mm; T min.:-20 °C; L1:56 mm; C:25.7 kN; H2:140 mm; Designation of housing:PH207-; Recommended tightening torque for set screw:8 Nm; |
Kobelco YN15V00007F1 Hydraulic Final Drive Motor Video