| 28 0541 01 Rollix Slewing Ring Bearings | d:140 mm; Mass shaft washer:4.8 kg; B:20.5 mm; d1:240 mm; r1,2 min.:2.1 mm; |
| 38 0741 01 Rollix Slewing Ring Bearings | A:43 mm; s1:27.5 mm; H:189 mm; Basic dynamic load rating C:35.1 kN; Limiting speed:800 r/min; J7:20 mm; R1:28.5 mm; Housing material:Cast iron; Db2:116 mm; J6:127 mm; Housing:FYTB 510 M/VZ033; N4:2 mm; Mass bearing unit:2.05 kg; A1:15 mm; Db1:107 mm; Da:101.6 mm; B1:46 mm; A3:3.2 mm; Recommended diameter for attachment bolts, inch G:0.625 in; Recommended diameter for attachment bolts, mm G:16 mm; |
| 32 0541 01 Rollix Slewing Ring Bearings | ba:52.388 mm; P60°:104 kN; Taconite seal (db shaft position):TER 118; Stabilizing ring:SR-20-17; J1:60.325 mm; P90°:62.3 kN; Initial grease fill:181.44 g; PG:1/4 NPT; da:180 mm; H2:44.45 mm; J min.:295.275 mm; P120°:39.1 kN; L:387.35 mm; N1:22.225 mm; H:222.25 mm; Max. speed for Taconite seal:675 r/min; A2:219.075 mm; Appropriate attachment bolt size G:0.75 in; R2:30.163 mm; H1:114.3 mm; |
| 11.50.3167.001.49.1502 Standard 5 Slewing Ring Bearings | Recommended lock nut tightening angle α:95 °; Fatigue load limit Pu:0.475 kN; Recommended diameter for attachment bolts, mm G:10 mm; Mass bearing unit:1.05 kg; R1:19.5 mm; RG:1/4-28 UNF; SWN:7 mm; J6:96 mm; B1:38 mm; N4:4 mm; Recommended diameter for attachment bolts, inch G:0.375 in; d:25 mm; Basic dynamic load rating C:19.5 kN; J7:24.5 mm; GN:1/4-28 SAE-LT; Bearing:YSA 206-2FK; J:83 mm; Db1:76 mm; |
| 32 0941 01 Rollix Slewing Ring Bearings | H2:135 mm; N1:48 mm; Oil level, max.:114 mm; J6:1120 mm; Q120°:5800 kN; L:1220 mm; Appropriate attachment bolt, size G:42 mm; P180°:4000 kN; H1:420 mm; da:470 mm; J:1030 mm; Ca:226 mm; Locating ring:2 x FRB 29.5/720; N:60 mm; P120°:3600 kN; Bearing (basic designation):230/500 K; Da:720 mm; Cap bolt, rec. tightening torque:850 N·m; Oil seal:2 x TSD 30/500 U; Eye bolt, size:2 x M 42; |
| 11.40.2915.000.11.1502 Standard 5 Slewing Ring Bearings | d:300 mm; G:Tr 300x4; B5:53 mm; G2:M 6; Mass adapter sleeve assembly:27.5 kg; Hydraulic nut:HMV 60E; d3:380 mm; G3:9 mm; A:3.9 mm; B1:208 mm; B:40 mm; d1:280 mm; |
| 191.40.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Fillet Radius ra:0.80 mm; Set:Duplex Set DF; Basic Dynamic Radial Load Rating C:15100 N; Basic Static Radial Load Rating Co:16600 N; D:76.2000 mm; B:31.75 mm; Lateral Eccentricity Max LE:0.003 mm; d:44.475 mm; |
| 192.40.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Category:Pillow Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:19.522; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:Concentric Collar; Housing Style:4 Bolt Pillow Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Non-expansion; Mounting Bolts:3/4 Inch; Relubricatable:Yes; Insert Part Number:22218; Seals:Teflon Labyrinth; |
| 25 0641 01 Rollix Slewing Ring Bearings | Specific static load factor K0:45 N/mm²; Coefficient of friction µ max.:0.15; Mass bushing:0.008 kg; D:14 mm; d:9 mm; Tolerance shaft:e7; Permissible sliding velocity v min.:0 m/s; B:10 mm; Coefficient of friction µ min.:0.08; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; Permissible sliding velocity v max.:0.5 m/s; |
| 2 052 Rollix Slewing Ring Bearings | ra max.:0.3 mm; Db:35.6 mm; Basic dynamic load rating C:26.4 kN; Da:40.5 mm; s max.:0.8 mm; D:45 mm; Mass bearing:0.16 kg; Basic static load rating C0:56 kN; F:35 mm; E:40 mm; db:34.5 mm; r1,2 min.:0.3 mm; Fatigue load limit Pu:6.55 kN; Limiting speed:13000 r/min; d:30 mm; B:26 mm; Reference speed:12000 r/min; da:39.4 mm; |