| 191.40.3150.990.41.1502 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:232000 N; Accessories:Snap-Ring; B:49.00 mm; Basic Dynamic Radial Load Rating C:205000 N; Oil Speed Rating Open/Shielded n2:2900 rpm; d:105.000 mm; Grease Speed Rating Open/Shielded n1:2400 rpm; D:225.0000 mm; Fillet Radius ra:2.50 mm; |
| 192.50.5000.990.41.1501 Standard 5 Slewing Ring Bearings | P90°:1300 kN; J6:520 mm; da:180 mm; Eye bolt, size:2 x M 20; J1:120 mm; A:255 mm; H2:80 mm; Oil level, max.:60 mm; Locating ring:4 x FRB 10/310; H:375 mm; N:34 mm; P150°:880 kN; Oil seal:TSD 3040 U; End cover:ETS 3138 R; Mass housing:97.5 kg; Cap bolt, size:M 24x150; bc:117.5 mm; Appropriate attachment bolt, size G:24 mm; P180°:1100 kN; Cap bolt, rec. tightening torque:350 N·m; |
| 36 0641 01 Rollix Slewing Ring Bearings | T:33.7 mm; Basic static load rating C0:6.55 kN; H:108 mm; Thread grub screw G2:1/4-28 UNF; L1:62 mm; Housing material:Composite for food a; J1:22.2 mm; Recommended diameter for attachment bolts, mm G:10 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Recommended tightening torque for grub screw:4 N·m; B:31 mm; s1:18.3 mm; Basic dynamic load rating C:10.8 kN; H1:42.9 mm; Limiting speed with shaft tolerance h6:5000 r/min; |
| 27 0741 01 Rollix Slewing Ring Bearings | rb max.:0.6 mm; C2:4.5 mm; Calculation factor f1:1; C1:10.9 mm; Mass bearing:0.8 kg; Da max.:134 mm; Static axial stiffness, preload class B:88 N/µm; r3,4 min.:0.6 mm; C3:2.9 mm; D:140 mm; da min.:106 mm; Calculation factor fHC:1.01; Calculation factor f2C:1.08; dn:116.1 mm; Attainable speed for grease lubrication:15000 r/min; Static axial stiffness, preload class C:139 N/µm; D2:128.7 mm; |
| 162.45.2510.890.11.1503 Standard 5 Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:29200 N; Basic Static Radial Load Rating Co:18600 N; Oil Speed Rating Open/Shielded n2:11000 rpm; Grease Speed Rating Open/Shielded n1:9000 rpm; Fillet Radius ra:1.00 mm; Accessories:One Shield; D:72.0000 mm; B:19.00 mm; d:20.000 mm; |
| 27 0411 01 Rollix Slewing Ring Bearings | L:500 mm; Permissible sliding velocity v max.:2.5 m/s; B:100 mm; Specific dynamic load factor K:120 N/mm²; Coefficient of friction µ min.:0.02; Mass strip:0.14 kg; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.2; H:1 mm; Specific static load factor K0:250 N/mm²; |
| 121.36.4750.990.41.1502 Standard 5 Slewing Ring Bearings | d:320 mm; r1 min.:1.1 mm; Basic static load rating C0:4500 kN; Specific static load factor K0:120 N/mm²; C:135 mm; Lubricant:Maintenance free &nd; ra max.:1 mm; r2 min.:3 mm; D:440 mm; Design (sliding contact surface combination):Steel/PTFE FRP; Da min.:370 mm; da min.:328 mm; b:21 mm; Mass plain bearing:69 kg; M:8 mm; b1:21 mm; Specific dynamic load factor K:80 N/mm²; Da max.:426 mm; Material constant KM:1055; |
| 121.32.3550.990.41.1502 Standard 5 Slewing Ring Bearings | Operating clearance factor k2:0.097; da max.:167 mm; B1:83 mm; G1:14 mm; G:M 135x2; d1:125 mm; Da max.:190 mm; ra max.:2 mm; r1,2 min.:2 mm; s2 max.:4.6 mm; Limiting speed:850 r/min; B:69 mm; B2 ≈:93 mm; Mass bearing + sleeve:8.9 kg; D:200 mm; d2 ≈:149 mm; da min.:134.6 mm; s1 max.:11.4 mm; Fatigue load limit Pu:112 kN; Basic dynamic load rating C:720 kN; |
| 31 0741 01 Rollix Slewing Ring Bearings | Cap bolt:4 x 3/4-10 UNC; J min.:431.8 mm; A2:279.4 mm; Eye bolt:2 x 3/8-16 UNC; H:320.675 mm; P60°:230 kN; P90°:138 kN; RG:3/4 NPT; R2:39.688 mm; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; J1:95.25 mm; N1:28.575 mm; h:50.8 mm; Taconite seal:TER 128; A1:158.75 mm; R1:95.25 mm; Adapter sleeve assembly:SNW 30x5.3/8; Da:269.999 mm; End plug (suffix Y):EPR 16; |
| 121.32.3750.990.41.1502 Standard 5 Slewing Ring Bearings | D:220.0000 mm; Fillet Radius ra:2.00 mm; d:160.000 mm; Oil Speed Rating n2:7200 rpm; Basic Static Radial Load Rating Co:315000 N; B:56.00 mm; Grease Speed Rating n1:4800 rpm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:208000 N; |