| 12.50.3739.001.49.1502 Standard 5 Slewing Ring Bearings | P150°:66.7 kN; Ca:67.793 mm; P120°:72.5 kN; Initial grease fill:379.89 g; Cap bolt, SAE grade:5; P60°:185 kN; Taconite seal:TER 112; P90°:111 kN; H2:53.975 mm; R2:30.163 mm; H1:133.35 mm; da:104.775 mm; A2:254 mm; Stabilizing ring:SR-24-20; Cap bolt:2 x 1-8 UNC; Da:215.001 mm; A1:120.65 mm; H:257.175 mm; Max. speed for Taconite seal:725 r/min; L:419.1 mm; |
| 38 0941 01 Rollix Slewing Ring Bearings | B:20 mm; D:17 mm; Specific dynamic load factor K:40 N/mm²; Coefficient of friction µ max.:0.15; d:15 mm; Specific static load factor K0:80 N/mm²; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:1 m/s; Tolerance housing:H7; Mass bushing:0.0015 kg; Coefficient of friction µ min.:0.06; Tolerance shaft:h9; |
| 28 1091 01 Rollix Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:307000 N; B:104.00 mm; Grease Speed Rating n1:2000 rpm; D:210.0000 mm; d:85.000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:2800 rpm; Basic Static Radial Load Rating Co:335000 N; Fillet Radius ra:3.00 mm; |
| 161.50.2660.891.41.1503 Standard 5 Slewing Ring Bearings | B:31.00 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; Basic Dynamic Radial Load Rating C:87100 N; D:130.0000 mm; d:50.000 mm; Grease Speed Rating Open/Shielded n1:5200 rpm; Sealed Speed Rating n3:3700 rpm; Basic Static Radial Load Rating Co:52000 N; Fillet Radius ra:2.00 mm; Accessories:Two Seals; |
| 35 1091 01 Rollix Slewing Ring Bearings | rs (min):2 mm; Pu:549 kN; Grease:1040 kN; D:210 mm; d:140 mm; B:69 mm; with tapered bore:1 800 min-1; Oil:107.230 kN; with cylindrical bore:1 400 min-1; Dynamic (Cr):4.5 mm; Static (Cor):8.3 mm; |
| 192.25.2500.990.41.1502 Standard 5 Slewing Ring Bearings | Basic Dynamic Radial Load Rating C:15900 N; Fillet Radius rb:0.60 mm; Oil Speed Rating n2:19000 rpm; Fillet Radius ra:1.00 mm; B:14.00 mm; D:47.0000 mm; Grease Speed Rating n1:15000 rpm; d:17.000 mm; Basic Static Radial Load Rating Co:8650 N; |
| 7 0573 Rollix Slewing Ring Bearings | H2:30.163 mm; Initial grease fill:175.77 g; H:161.925 mm; H1:82.55 mm; N1:19.05 mm; Appropriate attachment bolt size G:0.625 in; Max. speed for PosiTrac Plus seal:2150 r/min; R1:49.212 mm; P120°:18.2 kN; h:34.925 mm; P90°:29.8 kN; Da:130 mm; Labyrinth ring (dc shaft position):LOR 33; P150°:16.5 kN; J min.:219.075 mm; Cap bolt:2 x 1/2-13 UNC; Ca:55.804 mm; Cap bolt, SAE grade:8; P60°:49.4 kN; |
| 6 0475 22 Rollix Slewing Ring Bearings | Category:Pillow Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:31.326; Product Group:M06288; Number of Mounting Holes:2; Mounting Method:Concentric Collar; Housing Style:2 Bolt Pillow Block; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Steel; Expansion / Non-expansion:Non-expansion; Mounting Bolts:7/8 Inch; Relubricatable:Yes; Insert Part Number:22220; Seals:Triple Lip Nitrile Rubber; |
| 29 1091 01 Rollix Slewing Ring Bearings | Oil level, max.:104 mm; Oil seal:2 x TSD 3068 U; Cap bolt, rec. tightening torque:400 N·m; Q150°:1650 kN; N:50 mm; Ca:197 mm; N1:42 mm; Cap bolt, size:M 30x220; H:631 mm; P150°:2200 kN; A2:363 mm; A:363 mm; N4 max.:25 mm; H1:320 mm; Appropriate attachment bolt, size G:36 mm; L:880 mm; P180°:2800 kN; Da:520 mm; P90°:3400 kN; Appropriate attachment bolt, rec. tightening torque:2280 N·m; |
| 121.45.5300.990.41.1502 Standard 5 Slewing Ring Bearings | R1:163.512 mm; J min.:666.75 mm; Housing:SAFS 640; Ca:147.803 mm; Labyrinth ring:2 x LOR 664; H:495.3 mm; h:87.313 mm; A1:228.6 mm; Stabilizing ring:SR-0-40; J1:139.7 mm; Cap bolt, SAE grade:8; P150°:222 kN; RG:1 NPT; Bearing limiting speed:1500 r/min; Mass pillow block:431 kg; P90°:400 kN; ba:103.188 mm; Cap bolt recommended tightening torque:4284.4 N·m; End plug (suffix Y):EPR 21; |