| 91.50.2644.990.41.1502 Standard 5 Slewing Ring Bearings | D:47.0000 mm; Oil Speed Rating n2:19000 rpm; Basic Static Radial Load Rating Co:8150 N; Grease Speed Rating n1:16000 rpm; Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:14800 N; Fillet Radius ra:1.00 mm; B:14.00 mm; d:17.000 mm; |
| 192.32.3150.990.41.1502 Standard 5 Slewing Ring Bearings | Basic dynamic load rating C:490 kN; rb max.:1 mm; r2 min.:1 mm; Basic static load rating C0:2450 kN; Lubricant:Regular relubricatio; Mass plain bearing:2.75 kg; r1 min.:1 mm; Da min.:112.9 mm; D:130 mm; Material constant KM:330; d:90 mm; B:60 mm; Da max.:123.5 mm; b:9.5 mm; ra max.:1 mm; Specific static load factor K0:500 N/mm²; da min.:97.4 mm; Specific dynamic load factor K:100 N/mm²; α:5 °; |
| 38 0741 01 Rollix Slewing Ring Bearings | A:43 mm; s1:27.5 mm; H:189 mm; Basic dynamic load rating C:35.1 kN; Limiting speed:800 r/min; J7:20 mm; R1:28.5 mm; Housing material:Cast iron; Db2:116 mm; J6:127 mm; Housing:FYTB 510 M/VZ033; N4:2 mm; Mass bearing unit:2.05 kg; A1:15 mm; Db1:107 mm; Da:101.6 mm; B1:46 mm; A3:3.2 mm; Recommended diameter for attachment bolts, inch G:0.625 in; Recommended diameter for attachment bolts, mm G:16 mm; |
| 191.32.3150.990.41.1502 Standard 5 Slewing Ring Bearings | B:20.60 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:11000 rpm; Basic Dynamic Radial Load Rating C:20800 N; Accessories:No Shield, no Seal; D:52.0000 mm; Sealed Speed Rating n3:8000 rpm; Grease Speed Rating n1:8000 rpm; d:25.000 mm; Basic Static Radial Load Rating Co:14000 N; |
| 12.40.3300.000.11.1502 Standard 5 Slewing Ring Bearings | Calculation factor kr:0.25; K:4 mm; b1:7 mm; das:177 mm; d:160 mm; Mass bearing:7 kg; D1 ≈:200 mm; Limiting speed:1600 r/min; B:60 mm; Reference speed:1300 r/min; Fatigue load limit Pu:96.5 kN; da min.:170 mm; r1,2 min.:2 mm; ra max.:2 mm; d1 ≈:185 mm; D:220 mm; Basic dynamic load rating C:446 kN; Basic static load rating C0:915 kN; Da max.:211 mm; |
| 6 0508 Rollix Slewing Ring Bearings | dk:53 mm; Specific dynamic load factor K:100 N/mm²; C1 max.:24 mm; h1:145 mm; α:6 °; G:M 42x3; d2 max.:94 mm; Material constant KM:330; B:28 mm; l4 max.:194 mm; Basic static load rating C0:166 kN; d:40 mm; w:50 mm; Mass rod end:2.2 kg; r1 min.:0.6 mm; l3 min.:65 mm; d4 ≈:58 mm; Basic dynamic load rating C:100 kN; l5 ≈:25 mm; l7 min.:40 mm; |
| 161.45.2510.890.11.1503 Standard 5 Slewing Ring Bearings | Grease:7 900 min-1; Static (Cor):24.170 kN; rs:1.5 mm; Oil:9 400 min-1; Weight:0.625 kg; d:40 mm; da:47 min; Da:81 max; ra:1.5 max; Pu:1.099 kN; Bearing designation:6308 ; Dynamic (Cr):40.760 kN; D:90 mm; B:23 mm; |
| 12.50.2559.201.49.1502 Standard 5 Slewing Ring Bearings | Oil Speed Rating n2:4000 rpm; Basic Dynamic Radial Load Rating 40º C1:159000 N; Shielded or Sealed Co2:134000 N; Fillet Radius ra:2.00 mm; D:180.0000 mm; d:100.000 mm; B:68.00 mm; Grease Speed Rating n1:3000 rpm; Basic Static Radial Load Rating 15º Co1:173000 N; Fillet Radius rb:1.00 mm; Width Plain C2:146000 N; |
| 27 0741 01 Rollix Slewing Ring Bearings | rb max.:0.6 mm; C2:4.5 mm; Calculation factor f1:1; C1:10.9 mm; Mass bearing:0.8 kg; Da max.:134 mm; Static axial stiffness, preload class B:88 N/µm; r3,4 min.:0.6 mm; C3:2.9 mm; D:140 mm; da min.:106 mm; Calculation factor fHC:1.01; Calculation factor f2C:1.08; dn:116.1 mm; Attainable speed for grease lubrication:15000 r/min; Static axial stiffness, preload class C:139 N/µm; D2:128.7 mm; |
| 7 0573 Rollix Slewing Ring Bearings | H2:30.163 mm; Initial grease fill:175.77 g; H:161.925 mm; H1:82.55 mm; N1:19.05 mm; Appropriate attachment bolt size G:0.625 in; Max. speed for PosiTrac Plus seal:2150 r/min; R1:49.212 mm; P120°:18.2 kN; h:34.925 mm; P90°:29.8 kN; Da:130 mm; Labyrinth ring (dc shaft position):LOR 33; P150°:16.5 kN; J min.:219.075 mm; Cap bolt:2 x 1/2-13 UNC; Ca:55.804 mm; Cap bolt, SAE grade:8; P60°:49.4 kN; |