| 1 0555 01 Rollix Slewing Ring Bearings | D:170.0000 mm; d:95.000 mm; B:43.00 mm; Grease Speed Rating n1:3400 rpm; Basic Static Radial Load Rating Co:34500 N; Basic Dynamic Radial Load Rating C:83200 N; Oil Speed Rating n2:4000 rpm; Fillet Radius ra:2.00 mm; |
| 11.50.3167.001.49.1502 Standard 5 Slewing Ring Bearings | Recommended lock nut tightening angle α:95 °; Fatigue load limit Pu:0.475 kN; Recommended diameter for attachment bolts, mm G:10 mm; Mass bearing unit:1.05 kg; R1:19.5 mm; RG:1/4-28 UNF; SWN:7 mm; J6:96 mm; B1:38 mm; N4:4 mm; Recommended diameter for attachment bolts, inch G:0.375 in; d:25 mm; Basic dynamic load rating C:19.5 kN; J7:24.5 mm; GN:1/4-28 SAE-LT; Bearing:YSA 206-2FK; J:83 mm; Db1:76 mm; |
| 11.50.3347.001.49.1502 Standard 5 Slewing Ring Bearings | Basic Static Radial Load Rating Co:200000 N; Sealed Speed Rating n3:1600 rpm; Fillet Radius ra:2.00 mm; D:200.0000 mm; B:69.80 mm; d:110.000 mm; Basic Dynamic Radial Load Rating C:203000 N; Accessories:No Shield, no Seal,; Grease Speed Rating n1:1600 rpm; Oil Speed Rating n2:2600 rpm; |
| 191.50.3150.990.41.1502 Standard 5 Slewing Ring Bearings | U:24 mm; Ew:33 mm; Fatigue load limit Pu:5.85 kN; Reference speed:15000 r/min; Mass needle roller and cage assembly:0.039 kg; Basic static load rating C0:47.5 kN; Limiting speed:17000 r/min; Basic dynamic load rating C:31.9 kN; Fw:25 mm; |
| 35 0641 01 Rollix Slewing Ring Bearings | Max. speed for PosiTrac Plus seal:1300 r/min; Stabilizing ring:SR-20-17; H1:114.3 mm; P120°:52.5 kN; Initial grease fill:365.71 g; P180°:57.4 kN; H:222.25 mm; L:387.35 mm; P60°:141 kN; S:4.763 mm; db:114.3 mm; da:100 mm; Labyrinth ring (db shaft position):LOR 118; A2:155.575 mm; h:42.069 mm; PosiTrac Plus contact element (db shaft position):B10724-117; PosiTrac Plus contact element (dc shaft position):B10724-106; |
| 7 0849 Rollix Slewing Ring Bearings | B:56.00 mm; Basic Static Radial Load Rating Co:315000 N; d:240.000 mm; Basic Dynamic Radial Load Rating C:255000 N; Sealed Speed Rating n3:1000 rpm; Fillet Radius ra:2.50 mm; Oil Speed Rating Open/Shielded n2:2000 rpm; Accessories:Without Accessories; D:360.0000 mm; Grease Speed Rating Open/Shielded n1:1700 rpm; |
| 36 0941 01 Rollix Slewing Ring Bearings | d:4.000 mm; Fillet Radius ra:0.30 mm; B:5.00 mm; Basic Dynamic Radial Load Rating C:1470 N; D:16.0000 mm; Sealed Speed Rating n3:30000 rpm; Basic Static Radial Load Rating Co:600 N; Oil Speed Rating Open/Shielded n2:50000 rpm; Grease Speed Rating Open/Shielded n1:43000 rpm; Accessories:One Seal; |
| 25 0411 01 Rollix Slewing Ring Bearings | s max.:37.7 mm; Basic dynamic load rating C:49500 kN; D1 ≈:1954 mm; Calculation factor kr:0.35; Reference speed:130 r/min; da min.:1470 mm; da max.:1564 mm; Limiting speed:170 r/min; Mass bearing:10700 kg; Basic static load rating C0:116000 kN; B:775 mm; D:2180 mm; b:22.3 mm; ra max.:8 mm; r1,2 min.:19 mm; K:12 mm; Design variant/feature:NNU K30/W33; d:1400 mm; F:1598 mm; Da max.:2140 mm; |
| 32 1091 01 Rollix Slewing Ring Bearings | B2:509 mm; B1:483 mm; d1:670 mm; A:12 mm; G:Tr 750x7; Mass withdrawal sleeve:212 kg; G1:45 mm; Hydraulic nut:HMV 150 E; G2:G 1/4; d:710 mm; |
| 22 0841 01 Rollix Slewing Ring Bearings | RG:3/8 NPT; R2:30.163 mm; Bearing limiting speed:4000 r/min; PG:1/4 NPT; H2:44.45 mm; Pa:16.7 kN; ba:46.831 mm; Da:180 mm; R1:65.088 mm; Labyrinth ring:2 x LOR 111; Cap bolt:5/8-11 UNC; P90°:84.5 kN; A2:155.575 mm; A1:111.125 mm; h:40.481 mm; P60°:141 kN; Cap bolt, SAE grade:8; End plug (suffix Y):EPR 14; P120°:52.5 kN; Stabilizing ring:2 x 38151-24; |