| 121.40.4500.990.41.1502 Standard 5 Slewing Ring Bearings | A1:111.125 mm; Ca:69.799 mm; L:387.35 mm; S:4.763 mm; Appropriate attachment bolt size G:0.875 in; Mass pillow block:33.9 kg; Cap bolt, SAE grade:8; P120°:35.6 kN; RG:3/8 NPT; H:222.25 mm; H2:44.45 mm; N1:25.4 mm; R2:30.163 mm; Da:180 mm; P90°:56.5 kN; da:71.438 mm; h:44.45 mm; R1:66.675 mm; J max.:333.375 mm; Max. speed for PosiTrac Plus seal:1950 r/min; |
| 6 0574 09 Rollix Slewing Ring Bearings | r3,4 min.:4 mm; Calculation factor Y0:1.8; rc max.:1.5 mm; b:17 mm; r5 min.:1.5 mm; Mass bearing pair:35.2 kg; Calculation factor Y1:1.9; K:10 mm; Da max.:264 mm; ra max.:4 mm; Basic dynamic load rating C:1165 kN; D:280 mm; 2B:116 mm; Basic static load rating C0:1600 kN; Ca min.:8 mm; Limiting speed:2400 r/min; Reference speed:1400 r/min; Calculation factor Y2:2.9; Da min.:239 mm; Fatigue load limit Pu:163 kN; |
| 161.50.2500.891.41.1503 Standard 5 Slewing Ring Bearings | Accessories:Two Shields & Snap-R; B:8.00 mm; D:28.0000 mm; d:12.000 mm; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:32000 rpm; Sealed Speed Rating n3:17000 rpm; Basic Dynamic Radial Load Rating C:5070 N; Basic Static Radial Load Rating Co:2360 N; Grease Speed Rating Open/Shielded n1:26000 rpm; |
| 23 0941 01 Rollix Slewing Ring Bearings | End plug (suffix Y):EPR 11; PG:1/8 NPT; J max.:298.45 mm; H1:101.6 mm; Mass pillow block:21.4 kg; N1:22.225 mm; A2:149.225 mm; RG:3/8 NPT; h:38.1 mm; L:349.25 mm; R1:60.325 mm; Max. speed for PosiTrac Plus seal:1800 r/min; Initial grease fill:141.75 g; P180°:49.8 kN; R2:27.781 mm; da:80.963 mm; Cap bolt recommended tightening torque:149.1 N·m; Ca:49.809 mm; Appropriate attachment bolt size G:0.75 in; |
| 121.50.5600.990.41.1502 Standard 5 Slewing Ring Bearings | H:127 mm; r3,4 min.:10 mm; C:23.495 mm; Fatigue load limit Pu:2120 kN; Industry reference:T11500; Basic dynamic load rating C:9300 kN; B:46 mm; ra max.:9 mm; D:660.4 mm; Limiting speed:500 r/min; Reference speed:260 r/min; Da max.:325 mm; Basic static load rating C0:42500 kN; Dynamic load rating C1:12599 kN; D1:292.1 mm; Dynamic load rating C90:3267 kN; d:292.1 mm; da min.:607 mm; d1:658.4 mm; Mass bearing:223 kg; |
| 192.50.3150.990.41.1502 Standard 5 Slewing Ring Bearings | with tapered bore:790 min-1; Static (Cor):16.7 mm; Dynamic (Cr):9 mm; Oil:201.160 kN; rs (min):4 mm; Pu:1460 kN; Grease:2360 kN; d:260 mm; D:400 mm; B:104 mm; with cylindrical bore:670 min-1; |
| 28 0411 01 Rollix Slewing Ring Bearings | da:106.362 mm; End plug (suffix Y):EPR 14; Cap bolt recommended tightening torque:298.3 N·m; Initial grease fill:181.44 g; P180°:57.4 kN; PG:1/4 NPT; R2:30.163 mm; Da:180 mm; Taconite seal:TER 113; H:222.25 mm; h:40.481 mm; Housing:SSAFS 024 KA; Cap bolt:5/8-11 UNC; Cap bolt, SAE grade:8; P120°:52.5 kN; R1:65.088 mm; A1:111.125 mm; L:387.35 mm; Max. speed for Taconite seal:725 r/min; |
| 161.45.2510.891.41.1503 Standard 5 Slewing Ring Bearings | r, r1,2 min.:0.3 mm; Mass inner ring:0.0036 kg; d:7 mm; B:12 mm; F:10 mm; |
| 12.30.2538.001.41.1503 Standard 5 Slewing Ring Bearings | Da max.:263 mm; Basic static load rating C0:1220 kN; D1 ≈:234 mm; Limiting speed:3200 r/min; Fatigue load limit Pu:114 kN; Mass bearing:27 kg; d:130 mm; D:280 mm; ra max.:3 mm; Operating clearance factor k2:0.122; Reference speed:2400 r/min; Basic dynamic load rating C:980 kN; Ca min.:-7.5 mm; r1,2 min.:4 mm; B:93 mm; Misalignment factor k1:0.093; d2 ≈:179 mm; s1 max.:31.2 mm; Da min.:216 mm; |
| 36 0411 01 Rollix Slewing Ring Bearings | d2 max.:84 mm; r1 min.:0.6 mm; d4 ≈:49 mm; l5 ≈:25 mm; h1:130 mm; Mass rod end:1.4 kg; l4 max.:174 mm; d:35 mm; l3 min.:60 mm; Basic dynamic load rating C:80 kN; Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:134 kN; l7 min.:40 mm; α:6 °; Material constant KM:330; G:M 36x3; w:41 mm; dk:47 mm; B:25 mm; C1 max.:22 mm; |