| 191.32.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Mass angle ring:0.27 kg; d1 ≈:90.55 mm; r3,4 min.:2.1 mm; B1:10 mm; d:65 mm; B2:15.5 mm; |
| 121.50.6000.990.41.1502 Standard 5 Slewing Ring Bearings | Appropriate attachment bolt size G:0.75 in; Bearing limiting speed:2800 r/min; Labyrinth ring:2 x LOR 112; ba:61.913 mm; J1:69.85 mm; N1:22.225 mm; da:104.775 mm; H1:133.35 mm; End plug (suffix Y):EPR 14; R1:77.787 mm; P90°:111 kN; S:4.763 mm; Da:215.001 mm; R2:30.163 mm; A1:120.65 mm; Cap bolt, SAE grade:5; Mass pillow block:49.9 kg; Initial grease fill:379.89 g; Ca:85.801 mm; Pa:27.4 kN; |
| 35 0541 01 Rollix Slewing Ring Bearings | J:210 mm; Rα:45 °; Housing material:Cast iron; SWN:11.113 mm; d:61.913 mm; A:65 mm; Thread grub screw G2:7/16-20 UNF; H1:76.2 mm; DN:6.579 mm; J max.:218 mm; GN:1/8-27 NPT; A1:35 mm; Basic static load rating C0:45 kN; Housing:SY 514 U; RG:1/8-27 NPT; Recommended diameter for attachment bolts, inch G:0.75 in; Hexagonal key size for grub screw N:5.556 mm; L:260 mm; B4:12 mm; s1:39.7 mm; |
| 61.50.2645.001.49.1504 Standard 5 Slewing Ring Bearings | Fatigue load limit Pu:0.655 kN; Housing material:Cast iron; Db2:95 mm; L:118 mm; s1:32.3 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Basic static load rating C0:15.3 kN; RG:1/4-28 UNF; J:92 mm; Housing:FY 507 M/VZ033; N4:4 mm; J6:106 mm; Db1:87 mm; N:14 mm; Recommended tightening torque for grub screw:16.5 N·m; T:53.3 mm; d:34.925 mm; J7:29 mm; Limiting speed:1100 r/min; A3:3.2 mm; |
| 38 0941 01 Rollix Slewing Ring Bearings | B:20 mm; D:17 mm; Specific dynamic load factor K:40 N/mm²; Coefficient of friction µ max.:0.15; d:15 mm; Specific static load factor K0:80 N/mm²; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:1 m/s; Tolerance housing:H7; Mass bushing:0.0015 kg; Coefficient of friction µ min.:0.06; Tolerance shaft:h9; |
| 22 1091 01 Rollix Slewing Ring Bearings | B:48.00 mm; Grease Speed Rating Open/Shielded n1:2800 rpm; Oil Speed Rating Open/Shielded n2:3400 rpm; Basic Dynamic Radial Load Rating C:176000 N; Basic Static Radial Load Rating Co:176000 N; Fillet Radius ra:2.50 mm; D:200.0000 mm; Accessories:Snap-Ring; d:80.000 mm; |
| 24 1091 01 Rollix Slewing Ring Bearings | Basic Static Radial Load Rating Co:65500 N; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:5000 rpm; Basic Dynamic Radial Load Rating C:67100 N; Sealed Speed Rating n3:5000 rpm; Oil Speed Rating n2:6700 rpm; d:40.000 mm; Accessories:Two Shields; D:90.0000 mm; B:36.50 mm; |
| 8 0980 06 Rollix Slewing Ring Bearings | D:110.0000 mm; Fillet Radius ra:2.00 mm; B:54.00 mm; Basic Dynamic Radial Load Rating C:133000 N; Basic Static Radial Load Rating Co:114000 N; d:50.000 mm; Grease Speed Rating n1:5000 rpm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:6000 rpm; |
| 24 0411 01 Rollix Slewing Ring Bearings | Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:44900 N; B:30.20 mm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:5600 rpm; D:80.0000 mm; d:40.000 mm; Oil Speed Rating n2:7500 rpm; Basic Static Radial Load Rating Co:34000 N; Grease Speed Rating n1:5600 rpm; |
| 11.35.2620.000.11.1503 Standard 5 Slewing Ring Bearings | Mass needle roller:0.108 g; r1,2 min.:0.1 mm; r1 max.:0.4 mm; Dw:1.5 mm; Lw:7.8 mm; r2 max.:0.6 mm; |