| 161.50.2500.891.41.1503 Standard 5 Slewing Ring Bearings | Accessories:Two Shields & Snap-R; B:8.00 mm; D:28.0000 mm; d:12.000 mm; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:32000 rpm; Sealed Speed Rating n3:17000 rpm; Basic Dynamic Radial Load Rating C:5070 N; Basic Static Radial Load Rating Co:2360 N; Grease Speed Rating Open/Shielded n1:26000 rpm; |
| 1 0422 01 Rollix Slewing Ring Bearings | B:157 mm; Oil:464.980 kN; d:440 mm; with tapered bore:420 min-1; rs (min):6 mm; with cylindrical bore:350 min-1; Grease:6410 kN; Pu:3210 kN; D:650 mm; Dynamic (Cr):12 mm; Static (Cor):22.3 mm; |
| 2 0935 Rollix Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:22000 rpm; D:30.0000 mm; Basic Static Radial Load Rating Co:2320 N; d:17.000 mm; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:28000 rpm; Basic Dynamic Radial Load Rating C:4360 N; Accessories:Two Shields; B:7.00 mm; Sealed Speed Rating n3:14000 rpm; |
| 1 0947 Rollix Slewing Ring Bearings | R1:95.25 mm; Initial grease fill:623.7 g; da:133.35 mm; End plug (suffix Y):EPR 16; PosiTrac Plus contact element:2 x B10724-125; Cap bolt recommended tightening torque:813.5 N·m; Stabilizing ring:SR-30-0; ba:65.088 mm; P60°:394 kN; H2:63.5 mm; Pa:32.7 kN; P180°:162 kN; P150°:136 kN; L:539.75 mm; Mass pillow block:117 kg; Housing:SSAFS 530; P120°:149 kN; H1:160.35 mm; Max. speed for PosiTrac Plus seal:1075 r/min; |
| 36 0541 01 Rollix Slewing Ring Bearings | D1 ≈:52 mm; Basic static load rating C0:170 kN; Minimum load factor A:0.19; r1,2 min.:1.1 mm; C:11 mm; Da max.:72 mm; R:72 mm; da min.:77 mm; Basic dynamic load rating C:81.9 kN; D:95 mm; d1 ≈:95 mm; H:34.3 mm; H1:37 mm; ra max.:1 mm; Fatigue load limit Pu:6.3 kN; Limiting speed:3400 r/min; D2:72 mm; s:28 mm; Mass bearing (including seat washer where applicable):1.2 kg; Reference speed:2400 r/min; |
| 34 0641 01 Rollix Slewing Ring Bearings | B:10.5 mm; d1:115 mm; r1,2 min.:1.1 mm; d:65 mm; Mass shaft washer:0.56 kg; |
| 31 0941 01 Rollix Slewing Ring Bearings | d3:730 mm; d:630 mm; B:75 mm; Mass adapter sleeve assembly:127 kg; B5:97 mm; A:6 mm; d1:600 mm; G:Tr 630x6; G3:12 mm; B1:254 mm; G2:M 8; Hydraulic nut:HMV 126E; |
| 29 0941 01 Rollix Slewing Ring Bearings | R2:31.75 mm; Stabilizing ring:2 x 38151-26; End plug (suffix Y):EPR 15; Mass pillow block:52.2 kg; Da:200 mm; H1:125.425 mm; Ca:62.789 mm; P60°:178 kN; P180°:72.5 kN; H2:52.388 mm; h:40.922 mm; R1:73.025 mm; Housing:SSAFS 026 KA; RG:3/8 NPT; A1:120.65 mm; A2:231.775 mm; L:419.1 mm; Eye bolt:2 x 3/8-16 UNC; da:112.713 mm; Pa:20.2 kN; |
| 29 1091 01 Rollix Slewing Ring Bearings | Oil level, max.:104 mm; Oil seal:2 x TSD 3068 U; Cap bolt, rec. tightening torque:400 N·m; Q150°:1650 kN; N:50 mm; Ca:197 mm; N1:42 mm; Cap bolt, size:M 30x220; H:631 mm; P150°:2200 kN; A2:363 mm; A:363 mm; N4 max.:25 mm; H1:320 mm; Appropriate attachment bolt, size G:36 mm; L:880 mm; P180°:2800 kN; Da:520 mm; P90°:3400 kN; Appropriate attachment bolt, rec. tightening torque:2280 N·m; |
| 27 0641 01 Rollix Slewing Ring Bearings | Oil Speed Rating n2:4800 rpm; Grease Speed Rating n1:3600 rpm; D:120.0000 mm; Accessories:One Seal; Sealed Speed Rating n3:3600 rpm; Fillet Radius ra:1.50 mm; d:65.000 mm; Basic Static Radial Load Rating Co:73500 N; B:38.10 mm; Basic Dynamic Radial Load Rating C:80600 N; |