| 23 0741 01 Rollix Slewing Ring Bearings | ra max.:3 mm; K:9 mm; G:M 200x3; D1 ≈:294 mm; Fatigue load limit Pu:150 kN; B2 ≈:117 mm; r1,2 min.:4 mm; Calculation factor Y1:2.6; G1:18 mm; Basic dynamic load rating C:1342 kN; Calculation factor Y2:3.9; Mass bearing + sleeve:39.5 kg; B1:112 mm; Limiting speed:2400 r/min; B:92 mm; Basic static load rating C0:1700 kN; Calculation factor e:0.26; D:340 mm; Calculation factor Y0:2.5; da min.:199 mm; |
| 27 0641 01 Rollix Slewing Ring Bearings | Oil Speed Rating n2:4800 rpm; Grease Speed Rating n1:3600 rpm; D:120.0000 mm; Accessories:One Seal; Sealed Speed Rating n3:3600 rpm; Fillet Radius ra:1.50 mm; d:65.000 mm; Basic Static Radial Load Rating Co:73500 N; B:38.10 mm; Basic Dynamic Radial Load Rating C:80600 N; |
| 2 0935 Rollix Slewing Ring Bearings | Grease Speed Rating Open/Shielded n1:22000 rpm; D:30.0000 mm; Basic Static Radial Load Rating Co:2320 N; d:17.000 mm; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:28000 rpm; Basic Dynamic Radial Load Rating C:4360 N; Accessories:Two Shields; B:7.00 mm; Sealed Speed Rating n3:14000 rpm; |
| 33 0741 01 Rollix Slewing Ring Bearings | d2 max.:54 mm; h:78 mm; l2 max.:107 mm; Mass rod end:0.32 kg; Material constant KM:330; Specific dynamic load factor K:150 N/mm²; G:M 20x1.5; r1 min.:0.3 mm; B:16 mm; α:9 °; C1 max.:13.5 mm; d:20 mm; dk:29 mm; l1 min.:43 mm; Basic dynamic load rating C:44 kN; Basic static load rating C0:42.5 kN; l7 min.:24 mm; |
| 11.50.4140.001.49.1502 Standard 5 Slewing Ring Bearings | A1:98.425 mm; PG:1/8 NPT; N1:19.05 mm; End plug (suffix Y):EPR 8; Pa:27.1 kN; R2:27.94 mm; P180°:42.3 kN; h:42.862 mm; ba:35.719 mm; Housing:FSAF 315; Initial grease fill:286.33 g; Labyrinth ring (dc shaft position):LOR 46; J max.:295.275 mm; Bearing limiting speed:5600 r/min; Stabilizing ring:2 x SR-1615; db:87.313 mm; Cap bolt recommended tightening torque:298.3 N·m; P120°:38.3 kN; |
| 35 0641 01 Rollix Slewing Ring Bearings | Max. speed for PosiTrac Plus seal:1300 r/min; Stabilizing ring:SR-20-17; H1:114.3 mm; P120°:52.5 kN; Initial grease fill:365.71 g; P180°:57.4 kN; H:222.25 mm; L:387.35 mm; P60°:141 kN; S:4.763 mm; db:114.3 mm; da:100 mm; Labyrinth ring (db shaft position):LOR 118; A2:155.575 mm; h:42.069 mm; PosiTrac Plus contact element (db shaft position):B10724-117; PosiTrac Plus contact element (dc shaft position):B10724-106; |
| 22 0941 01 Rollix Slewing Ring Bearings | D:115.0000 mm; Sealed Speed Rating n3:3400 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:5600 rpm; d:75.000 mm; Basic Dynamic Radial Load Rating C:42300 N; Basic Static Radial Load Rating Co:35500 N; Oil Speed Rating Open/Shielded n2:6700 rpm; B:20.00 mm; Accessories:Without Accessories; |
| 191.32.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Mass angle ring:0.27 kg; d1 ≈:90.55 mm; r3,4 min.:2.1 mm; B1:10 mm; d:65 mm; B2:15.5 mm; |
| 7 077 Rollix Slewing Ring Bearings | d1 ≈:98.75 mm; r1,2 min.:3 mm; D1:147 mm; Calculation factor Y0:0.9; B:33 mm; db min.:78 mm; d:65 mm; Reference speed:4000 r/min; C:28 mm; da max.:84 mm; D:140 mm; ra max.:3 mm; Fatigue load limit Pu:27.5 kN; Basic dynamic load rating C:240 kN; T:36 mm; Mass bearing:2.49 kg; Calculation factor Y:1.7; Basic static load rating C0:228 kN; C1:6 mm; Dimension series:2GB; |
| 191.32.3550.990.41.1502 Standard 5 Slewing Ring Bearings | S:4.763 mm; Housing:SAFS 232; J max.:488.95 mm; N1:28.575 mm; R2:33.337 mm; L:558.8 mm; Taconite seal (db shaft position):TER 156; Cap bolt, SAE grade:8; dc:153.988 mm; PG:1/4 NPT; End plug (suffix Y):EPR 18; H2:66.675 mm; P60°:345 kN; Da:289.999 mm; Eye bolt:2 x 3/8-16 UNC; ba:70.644 mm; P90°:207 kN; RG:3/4 NPT; Initial grease fill:793.8 g; Cap bolt recommended tightening torque:813.5 N·m; |