| 24 1091 01 Rollix Slewing Ring Bearings | Basic Static Radial Load Rating Co:65500 N; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:5000 rpm; Basic Dynamic Radial Load Rating C:67100 N; Sealed Speed Rating n3:5000 rpm; Oil Speed Rating n2:6700 rpm; d:40.000 mm; Accessories:Two Shields; D:90.0000 mm; B:36.50 mm; |
| 161.45.2654.890.11.1503 Standard 5 Slewing Ring Bearings | Labyrinth ring:2 x LOR 107; ba:50.006 mm; Stabilizing ring:SR-22-19; Cap bolt:5/8-11 UNC; H1:125.425 mm; da:96.838 mm; J min.:320.675 mm; L:419.1 mm; H:244.475 mm; P180°:72.5 kN; Max. speed for PosiTrac Plus seal:1450 r/min; R1:67.866 mm; P120°:66.7 kN; H2:52.388 mm; PG:1/4 NPT; Pa:17.3 kN; P90°:107 kN; Mass pillow block:52.2 kg; P60°:178 kN; Housing:SAFS 522; |
| 191.50.3150.990.41.1502 Standard 5 Slewing Ring Bearings | U:24 mm; Ew:33 mm; Fatigue load limit Pu:5.85 kN; Reference speed:15000 r/min; Mass needle roller and cage assembly:0.039 kg; Basic static load rating C0:47.5 kN; Limiting speed:17000 r/min; Basic dynamic load rating C:31.9 kN; Fw:25 mm; |
| 11.40.3150.001.41.1502 Standard 5 Slewing Ring Bearings | B:28.00 mm; Grease Speed Rating n1:4300 rpm; Accessories:Without Accessories; Fillet Radius ra:2.00 mm; d:85.000 mm; D:150.0000 mm; Oil Speed Rating n2:5000 rpm; Basic Dynamic Radial Load Rating C:83200 N; Basic Static Radial Load Rating Co:64000 N; Grease Speed Rating Open/Shielded n1:4300 rpm; Oil Speed Rating Open/Shielded n2:5000 rpm; Sealed Speed Rating n3:2800 rpm; |
| 161.45.2654.891.41.1503 Standard 5 Slewing Ring Bearings | Accessories:87000 Shield & Seal; Basic Interchange BCA:87016; Width - Overall B:12.7 mm; d:16.000 mm; Old MRC Bearing Number:202FSF4; Width - Inner Ring B1:12.20 mm; Basic Interchange NDH:87016; Fillet Radius ra:0.64 mm; Basic Radial Load Rating-Static SCO:3750 N; D:35.0000 mm; Basic Radial Load Rating-Dynamic DC:7610 N; Speed Rating-Single and Double Sealed Grease SDG:13000 rpm; Basic Interchange FAF:202KLD3; |
| 121.45.6000.990.41.1502 Standard 5 Slewing Ring Bearings | r2s (min):0.6 mm; d2:140 mm; Pu:69.700 kN; T:45 mm; a:46 mm; r1s (min):2 mm; Dynamic (Ca):335 kN; D:210 mm; Static (Coa):580 kN; rs (min):2.5 mm; B:45 mm; C:34 mm; |
| 121.40.4500.990.41.1502 Standard 5 Slewing Ring Bearings | A1:111.125 mm; Ca:69.799 mm; L:387.35 mm; S:4.763 mm; Appropriate attachment bolt size G:0.875 in; Mass pillow block:33.9 kg; Cap bolt, SAE grade:8; P120°:35.6 kN; RG:3/8 NPT; H:222.25 mm; H2:44.45 mm; N1:25.4 mm; R2:30.163 mm; Da:180 mm; P90°:56.5 kN; da:71.438 mm; h:44.45 mm; R1:66.675 mm; J max.:333.375 mm; Max. speed for PosiTrac Plus seal:1950 r/min; |
| 6 0508 Rollix Slewing Ring Bearings | dk:53 mm; Specific dynamic load factor K:100 N/mm²; C1 max.:24 mm; h1:145 mm; α:6 °; G:M 42x3; d2 max.:94 mm; Material constant KM:330; B:28 mm; l4 max.:194 mm; Basic static load rating C0:166 kN; d:40 mm; w:50 mm; Mass rod end:2.2 kg; r1 min.:0.6 mm; l3 min.:65 mm; d4 ≈:58 mm; Basic dynamic load rating C:100 kN; l5 ≈:25 mm; l7 min.:40 mm; |
| 35 0841 01 Rollix Slewing Ring Bearings | C:76.2 mm; rb max.:1 mm; da max.:115.5 mm; d:101.6 mm; b:10.5 mm; Da max.:152.5 mm; Lubricant:Regular relubricatio; Basic dynamic load rating C:900 kN; r2 min.:1 mm; Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:2650 kN; Da min.:139.5 mm; Mass plain bearing:7 kg; da min.:108 mm; b1:10 mm; Design (sliding contact surface combination):Steel/steel; Specific static load factor K0:300 N/mm²; |
| 2 105 Rollix Slewing Ring Bearings | Calculation factor Y:1.8; Db min.:90 mm; T:27 mm; B:27 mm; Da min.:85 mm; C:21 mm; d1 ≈:77.2 mm; Basic static load rating C0:143 kN; Calculation factor Y0:1; Calculation factor e:0.33; ra max.:1.5 mm; rb max.:1.5 mm; Cb min.:6 mm; Mass bearing:0.7 kg; D:95 mm; r1,2 min.:1.5 mm; Limiting speed:6700 r/min; Reference speed:5300 r/min; Fatigue load limit Pu:16 kN; Basic dynamic load rating C:113 kN; |