| 1 141 Rollix Slewing Ring Bearings | r:3,3 mm; Bore Diameter (mm):61,912; T:46,038 mm; R:3,5 mm; C:36,512 mm; D:139,7 mm; Size (mm):61.912x139.7x46.038; Bearing number:H715334/H715310; d:61,912 mm; Outer Diameter (mm):139,7; Width (mm):46,038; B:46,038 mm; |
| 68460A Franke Slewing Ring Bearings | T:52,761 mm; Size (mm):80x200x52.761; d:80 mm; Basic static load rating (C0):519 kN; D:200 mm; Outer Diameter (mm):200; Bore Diameter (mm):80; (Grease) Lubrication Speed:1500 r/min; B:49,212 mm; Weight:8,01 Kg; a:1,3 mm; Basic dynamic load rating (C):376 kN; Width (mm):52,761; Bearing number:98316/98788; C:34,925 mm; |
| 2 2022 Rollix Slewing Ring Bearings | B:16,5 mm; Factor depending on material and bearing type KM:480; r max:1,5 mm; Mass bushing:0.019 kg; α ±8:20 °; Basic static load rating - radial direction C0:85 kN; c1 min.:0.1 mm; Static load rating radial (C0):85 kN; c1 max.:0.7 mm; Size (mm):25x28x16.5; r max.:1.5 mm; c1 min:0,1 mm; B1:1,5 mm; Tolerance housing:H7; D1:35 mm; c2 min.:0.2 mm; Weight:0,021 Kg; Outer Diameter (mm):28; |
| 75068A Franke Slewing Ring Bearings | C - Cup Width:0.4375 in; D:1.4375 in; Series:00000; r - Cup Backface To Clear Radius1:0.06 in; Y - ISO Factor4:2.18; e - ISO Factor3:0.28; K - Factor2:2.12; Cg - Geometry Factor:0.033; Cup Part Number:00152X; Design Units:Imperial; Da - Cup Frontface Backing Diameter:1.34 in; Db - Cup Backface Backing Diameter:1.18 in; G2 - Heat Generation Factor (Rib-Roller End):2.9; G1 - Heat Generation Factor (Roller-Raceway):3.1; |
| 66142L Franke Slewing Ring Bearings | C:138 mm; D:420 mm; B2:32 mm; Outer Diameter (mm):420; Width (mm):138; Bearing number:22340 KCW33+H2340; B1:176 mm; d:200 mm; d1:180 mm; Bore Diameter (mm):200; Size (mm):200x420x138; B:138 mm; |
| 7 1997 04 Rollix Slewing Ring Bearings | Superseded Part:24052YMBW33W21A; Da - Outer Ring Backing Diameter:369.000 mm; Y2 - ISO Factor6:2.07; da - Inner Ring Backing Diameter:288.000 mm; Design Unit:METRIC; e - ISO Factor3:0.32; Cage Type:EMB; D:400.000 mm; Bearing Weight:63.9 Kg; R - Inner Ring To Clear Radius1:3.0 mm; Cage Material:Brass; C1(2) - Dynamic Radial Rating (Two-Rows):2380000 N; Y1 - ISO Factor5:3.15; Reference Thermal Speed Rating (Grease):830; |
| 73131L Franke Slewing Ring Bearings | Ab - Cage-Cone Frontface Clearance:0.1 in; Cage Type:Stamped Steel; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:4950 lbf; R - Cone Backface To Clear Radius3:0.14 in; a - Effective Center Location4:-0.13 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:12500 lbf; Cone Part Number:28678; Design Units:Imperial; Cg - Geometry Factor:0.0979; d:2 in; B - Cone Width:0.9688 in; |
| 75042A Franke Slewing Ring Bearings | Weight:0,00028 Kg; d:2 mm; Bore Diameter (mm):2; DA_:1.2; ra max.:0,15 mm; Bearing number:692; Z_:6; DE_:5.1; Basic dynamic load rating (C):0,33 kN; Prod_Type3:ESM_MD_OT; da min.:3,2 mm; hidTable:ecat_NSESBM; Cr:34; r:0.15; C:2,3 mm; Outer Diameter (mm):6; (Grease) Lubrication Speed:75 000 r/min; Size (mm):2x6x2.3; da:3.2; DI_:2.7; |
| 1 2560 01 Rollix Slewing Ring Bearings | r2 min.:0,3 mm; B:21 mm; C:15 mm; d:16 mm; D:32 mm; dk:28,575 mm; Width (mm):21; Basic dynamic load rating (C):21,6 kN; Outer Diameter (mm):32; Weight:0,08 Kg; da max:19,3 mm; r1 min.:0,3 mm; Angle:15 °; Bore Diameter (mm):16; Da min:25,5 mm; Size (mm):16x32x21; Bearing number:GE 16 PB; |
| 68502A Franke Slewing Ring Bearings | Basic static load rating - radial direction C0:620 kN; H:2 mm; Permissible sliding velocity v min.:0 m/s; Outer Diameter (mm):74; Bearing number:PCMW 487402 M; Basic dynamic load rating (C):300 kN; Ha:1.5 mm; Permissible sliding velocity v max.:2.5 m/s; Coefficient of friction µ min.:0.02; Bore Diameter (mm):48; D:74 mm; Basic dynamic load rating - radial direction C:300 kN; Specific static load factor K0:250 N/mm²; |