| K167867 Timken Tapered Roller Bearings | Bearing number:Modus Abec 7; Bore Diameter (mm):8; Size (mm):8x22x7; Outer Diameter (mm):22; Width (mm):7; |
| K172419 Timken Tapered Roller Bearings | Dimension H:4.409 in; Maximum Speed:2790 rpm; Ca - Axial Load Rating:2787.59 lbf; Note:This product line wa; Shaft Size:3-3/16 in; Cor - Static Load Rating:51931 lbf; Housing Width:5.3 in; Dimension M:3.5 in; Bearing Number:LSE303BR; Cr - Dynamic Load Rating:42039 lbf; Bearing - Housing - Seal:LSE303BRHKPS; Weight:64 lb; Seal Type:Kevlar Packing Seal; Dimension H1:1.7 in; Dimension H2:9.9 in; Dimension L:15.0 in; |
| K156820-B Timken Tapered Roller Bearings | G2 - Heat Generation Factor (Rib-Roller End):2940; d:43.0000 in; B - Cone Width:3.5000 in; Aa - Cage-Cone Backface Clearance:0.5 in; Cage Type:Pin-Type; Cone Part Number:EE776430; C1 - Dynamic Radial Rating (1 million revolutions)6:599000 lbf; a - Effective Center Location4:6.92 in; db - Cone Backface Backing Diameter:44.69 in; C0 - Static Radial Rating:1570000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:271000 lbf; |
| NA539/533D Timken Tapered Roller Bearings | d:160 mm; ra(max):2.5; Grease lub.:2100; Cr:231; r(min):3; Da(max):277; Size (mm):160x290x48; C:48 mm; Cu:9.45; (Refer.)Mass(kg):14.3; Bore Diameter (mm):160; da min.:173 mm; Weight:14,3 Kg; D:290 mm; Width (mm):48; Bearing number:6232; Outer Diameter (mm):290; Oil lub.:2500; ra max.:2,5 mm; Basic static load rating (C0):186 kN; |
| NA97450/97901D Timken Tapered Roller Bearings | C:42,48 mm; r:0,5 mm; Weight:0,78 Kg; R:1,5 mm; Bearing number:80033X/80066XG; db:62,5 mm; T:52 mm; D:66,675 mm; Width (mm):52; Bore Diameter (mm):33,338; da:44 mm; d:33,338 mm; F:4,76 mm; Size (mm):33.338x66.675x52; Outer Diameter (mm):66,675; L:5 mm; |
| K518419R Timken Thrust Tapered Roller Bearings | Shaft Dia., Nominal (d):155.0000; OD Chamfer Length (Co):1.800; Material:Wrapped bronze with; Wall Thickness (S3):2.500; Outer Diameter (mm):160; Shaft Size (ds) - 155 -0.145 / -0.185:155 0.145 / 0.185; ID Chamfer Angle (B deg.):45; Bearing Bore after Mounting (di) - 160 +0.100 / -0:160 +0.100 / 0; Bearing Type:straight; Bearing number:AST090 15590; Bore Diameter (mm):155; Housing Bore Dia. (Dh) - 160 +0.040 / -0:160 +0.040 / 0; |
| 43132/43319D Timken Tapered Roller Bearings | rb max.:0.6 mm; B:22 mm; Bore Diameter (mm):125; Calculation factor (single, tandem) X2:0.41; C1:6.5 mm; Da max.:119 mm; Gref:12 cm3; Preload class B:298 N/micron; Attainable speed for oil-air lubrication:24000 r/min; Calculation factor - X2:0.67; Preload class A:198 N/micron; r1,2 - min.:1.1 mm; Calculation factor f2A:1; Calculation factor - e:0.68; Calculation factor (back-to-back, face-to-face) Y2:1.41; |
| 27881/27820D Timken Tapered Roller Bearings | (Oil) Lubrication Speed:900 r/min; d:320 mm; r min.:5 mm; Bearing number:24164E; Calculation factor (Y1):1,65; Width (mm):218; (Grease) Lubrication Speed:720 r/min; Outer Diameter (mm):540; C:218 mm; Basic dynamic load rating (C):5050 kN; Bore Diameter (mm):320; Calculation factor (Y0):1,61; Size (mm):320x540x218; Weight:206 Kg; B:218 mm; D:540 mm; Basic static load rating (C0):6900 kN; Calculation factor (e):0,41; |
| K518419R Timken Thrust Tapered Roller Bearings | Bearing number:4044; Designation SX:CX035R; Designation SNR:R140.44; Designation FAG:713690430; Designation SKF:VKBA 846; |
| K159541 Timken Tapered Roller Bearings | Bore Diameter (mm):25; Bearing number:61905-2RS; Size (mm):25x42x9; B:9 mm; Width (mm):9; D:42 mm; d:25 mm; Outer Diameter (mm):42; C:9 mm; Weight:0,045 Kg; |