7009CD/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle

LET 25 mm d OUR 7009CD/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle EXPERTS China JCB Hydraulic Final Drive Motor Supplier 0.3 mm r1,2 - min. GET YOU THE PARTS YOU NEED.

Brand Name:SKF
Model Number:7009CD/P4A
d:25 mm
r1,2 - min.:0.3 mm
Bearing number:S71905 ACE/HCP4A
Basic dynamic load rating - C:4.9 kN
Calculation factor (single, tandem) Y2:0.87
Calculation factor - Y0:0.76
Basic dynamic load rating C:4.94 kN
Preload class A:57 N/micron

Product Details

d25 mm
r1,2 - min.0.3 mm
Bearing numberS71905 ACE/HCP4A
Basic dynamic load rating - C4.9 kN
Calculation factor (single, tandem) Y20.87
Calculation factor - Y00.76
Basic dynamic load rating C4.94 kN
Preload class A57 N/micron
da - min.27 mm
Da - max.40 mm
Preload class B86 N/micron
db max.29 mm
Db max.41.2 mm
d229.4 mm
Calculation factor f1.06
Calculation factor - Y20.87
ra max.0.3 mm
Calculation factor - f2C1.08
Calculation factor - f10.98
View more

Company Profile

China JCB Hydraulic Final Drive Motor Supplier
Phone +1-578-517-2841
View more

Related News

  • How do I choose a hydraulic pump?
    Engineering Essentials: Fundamentals of Hydraulic PumpsA hydraulic pump is a mechanical device that converts mechanical power into hydraulic energy. It generates flow with enough power to overcome pressure  Which Hydraulic Pump is Right for...
  • How do I know if my hydraulic pump is bad?
    4 Signs That You Need to Repair or Replace Your HydraulicAs soon as you see liquids anywhere inside the pump, other than in the tubes where they belong, you can be sure that there is something wrong with the pump. It  The Most Definitive Test...
  • What happens if you put engine oil in hydraulic?
    Is it possible to use motor oil in a hydraulic system? - QuoraFeb 29, 2016 — No you cannot use Motor Oil in a Hydraulic System. Motor Oil runs at a much higher temperature and Hydraulic Oil starts to fail at around 45c. Once you run Hydraulic Oil...

    • Recommended Products

    All Products Contact Now
    Contact Us